LawGrids logoLAWGRIDS.ORG

Rule 104, THE CENTRAL MOTOR VEHICLES RULES, 1989, (1-164): Fitment of reflectors

THE CENTRAL MOTOR VEHICLES RULES, 1989, (1-164) - Rule 104

Text of rule 104

Fitment of reflectors

212[104. Fitment of reflectors.—213[(1) Every motor vehicle manufactured on and after the 1st day of April, 2006, including trailers and semi-trailers, other than three-wheelers and motor cycles shall be fitted with two red reflectors, one each on both sides at their rear. Every motor cycle shall be fitted with at least one red reflex reflector at the rear: Provided that a reflective tape or reflective paint of not less than 20 mm width and running across the width of the body shall be affixed/painted at the front and rear of every goods carriage.] (2) Every goods carriage vehicle including trailers and semi-trailers other than three- wheeler 214[* * *] shall be fitted with two white reflectors one each at the extreme right and left bottom corners in the front of the vehicle and facing to the front. The reflecting area of each reflector shall not be less than 28.5 sq. centimetres, in the case of vehicles with overall length of more than 6 metres, and not less than 7 sq. centimetres in case of other vehicles.] 210 Substituted by G.S.R. 116(E), dated 27-2-2002, for "the driver of the vehicle" and "every motor vehicle", respectively (w.e.f. 27-8-2002). 211 Substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993). 212 23. The words "three wheelers of engine capacity not exceeding 500 cc and" omitted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 1-4-2006). 213 Sub-R. (1) and the proviso substituted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16- 9-2005). 214 The words "of engine capacity not exceeding 500 cc" omitted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 1-4-2006). 87 215[(3) All trailers including semi-trailers, other than those drawn by three-wheeled tractors 25[* * *] shall be fitted with the following reflex reflectors, namely,— (i) two white reflex reflectors in the front, one each at the right and left corners at a height not exceeding 1500 mm above the ground, (ii) two red reflex reflectors in the rear, one each at the right and left corners at a height not exceeding 1500 mm above the ground, and (iii) the area of the reflectors referred to above shall not be less than 28.5 sq. cm. in the case of trailers with overall length exceeding 6 metres and shall not be less than 7 sq. cm. in case of other trailers.] 216[(4) On and after expiry of one year from the date of commencement of the Central Motor Vehicles (Amendment) Rules, 1999, the reflectors referred to in this rule and in rule 110 shall be of reflex type conforming to 217[AIS:057:2005 till the corresponding BIS specifications are notified under the Bureau of Indian Standards Act, 1986 (63 of 1986)]. 218[(5) On and from the date of commencement of the Central Motor Vehicles Rules, 1993, every motor vehicle and trailer of length exceeding 6 metres shall be fitted with two amber coloured reflex reflectors on each left hand and right hand of the vehicle, one set as close to the front end as possible and the other set as close to the rear end as possible. The height of the side reflectors above the ground shall not be more than 1500 mm. The area of each reflector shall not be less than 28.5 sq. cm.: Provided that in case the distance between the two side reflectors is more than 3 metres, additional intermediate side reflectors shall be fitted so that the distance between any adjacent side reflector is not more than 3 metres.] 219[104-A. Fitment of reflectors on construction equipment vehicles.—All construction equipment vehicles shall be fitted with— (i) two white reflex reflectors in the front of the vehicle on each side and visible to on- coming vehicles from the front at night; (ii) two red reflectors in the rear of the vehicle, one each at right and left corners, at a height not exceeding 1500 mm above the ground in the case of unobstructed vision from 215 26. Substituted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999). 216 Substituted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999). Earlier sub-R. (4) was substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993). 217 Substituted by G.S.R. 589(E), dated 16-9-2005, for "the Indian Standards IS:8339— 1993 specified by the Bureau of Indian Standards" (w.e.f. 1-4-2006). 218 Substituted by G.S.R 338(E), dated 26-3-1993 (w.e.f. 26-3-1993). 219 Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000). 88 the rear and the implement or device shall not obstruct the visibility of the reflectors to the following vehicle; (iii) two sets of amber coloured side reflex reflectors, one each on left hand and right hand sides of the vehicle, one set as close to the front end and the other set as close to the rear end as possible to the basic machine without attachments and if the distance between the two amber side reflex reflectors is more than 3 metres, additional intermediate amber side reflex reflectors shall be fitted so that the distance between any adjacent amber side reflex reflector is not more than 3 metres: 220[Provided that the fitment of reflex reflectors on the implements such as booms of cranes and anus of shovels, shall not be mandatory. However, wherever possible the fitment of these reflectors may be done considering the working environment/nature of these machines in the fields;] (iv) the reflecting area of each reflex reflector shall not be less than 28.5 sq. cms; (v) the construction equipment vehicle shall be fitted with a retro-reflective tape or retro- reflective paint of not less than 20 millimeters width, running across the width of the body at the front and rear, and the colour of the reflective tape or reflective paint shall be white at the front and red at the rear; (vi) the reflectors referred to in this sub-rule, shall be of reflex type conforming to Indian Standards IS: 8339 specified by the Bureau of Indian Standards; (vii) the retro-reflective tape and paint shall be as per clause 801 and 803 of Ministry of Surface Transport (Roads Wing) specifications for Road and Bridge works (3rd Revision, 1995) as amended from time to time.] 221[104-B. Fitment of reflectors for agricultural tractors.—(1) Every agricultural tractor manufactured on and after the 1st day of April, 2006 shall be fitted with two non- triangular red reflectors of not less than 7 sq. cm reflecting area one each on both sides at the rear. (2) The reflectors referred in sub-rule (1) of this rule shall be of the reflex type conforming to AIS:057:2005 till the corresponding BIS specifications are notified under the Bureau of Indian Standards Act, 1986 (63 of 1986). 104-C. Fitment of reflectors on power tillers.—(1) On and from one year from the date of commencement of the Central Motor Vehicles (Fifth Amendment) Rules, 2005, every power tiller shall be fitted with two white reflex reflectors of not less than 7 sq. cm 220 Substituted by G.S.R. 116(E), dated 27-2-2002, for the proviso (w.e.f. 27-8-2002). 221 R. 104-B inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005). 89 reflecting area in the front of the vehicle one on each side and visible to oncoming vehicles from the front at night, conforming to AIS:057:2005 till corresponding BIS specifications are notified under the Bureau of Indian Standards Act, 1986 (63 of 1986). (2) In the case of trailers attached to power tillers, two red reflectors of not less than 7 sq.cm reflecting area in the rear side, one each at right and left corners, at a height not exceeding 1500 mm above the ground shall also be fitted.]

Previous and next

All provisions of THE CENTRAL MOTOR VEHICLES RULES, 1989, (1-164)

Questions people ask

Is rule 104 of THE CENTRAL MOTOR VEHICLES RULES, 1989, (1-164) still in force?

No repeal of the CENTRAL MOTOR VEHICLES RULES, 1989, (1-164) is recorded.