Rule 6, Bristles Grading and Marking Rules 1969: Method of Packing
Bristles Grading and Marking Rules 1969 - Rule 6
Text of rule 6
Method of Packing
6. Method of Packing.—(1) (a) Bristles of the same
grade designation shall be tied in bundles.
(b) A bundle (other than of shorts and rifling) shall not
be more than 51 mm (2 inches) and not less than 38
mm (1 ½inches) in diameter.
(2) The net contents of each case of bristles of all
grade designations shall be 10 Kg. or more, in
multiples of 2 Kg., subject to a maximum of 46 Kg.
(3) Bristles of different grade designations of 121 mm.
(4 ¾ inches) or below shall be packed in separate
cases.
(4) Bristles of different grade designations of over 121
mm. (4 ¾inches) may be packed in one case;
Provided that,
(a) the quantity of bristles of a particular grade
designation shall be in multiples of 2 Kg, and
(b) bristles of each grade designation shall be packed
in distinct layers.
(5) If black and grey bristles are packed in the same
case, the quantity of bristles of each of these two
colures shall be in multiples of 2 Kg. and these shall be
packed in distinct layers.
(6) (a) The container for packing shall be a wooden
case, which shall be clean and dry,
(b) Tin or aluminum cases may be used for packing
bristles for transit by air freight.
(7) The wooden cases and other containers shall be
lined with water-proof paper and shall contain
sufficient quantity of insecticide such as D.D.T. or
naphthalene balls.
(8) Each case shall be securely strapped and sealed.
EXPLANATION-—In this rule the expression “net contents”
shall mean “the weight of the bristles without any wrapping or
other additions other than ties of cotton, hemp or other
material".
42
SCHEDULE I
(See Rules 2 and 3)
Grade designations and definition of quality of bristles known commercially as *Extra Stiff Bristles produced in India.
Special characteristics
(Grade designation) --------------------------------------------------- General Characteristics
Co lour** Length @
(1) (2) (3) (4)
159 mm (6½" and over White 159 mm and The bristles shall be the natural produce obtained from pigs
and over over and shall be thoroughly washed, clean and dry in their
152 mm.. (6") " 152 mm natural co lour with root ends @ intact and free from damaged
146 mm. (5¾") " 146 mm or reclaimed bristles obtained from brushes as well as from all
140 mm (5½") " 140 mm foreign matter such as dust, dirt, or ox or horse tail hair or
133 mm (5¼") " 133 mm vegetable fibers or artificial fibers.
127 mm. (5") " 127 mm
121 mm. (4¾") " 121 mm
114 mm. (4½") " 114 mm
108 mm. (4¼”) " 108 mm
102 mm. (4") " 102 mm
95 mm (3¾") " 95 mm
89 mm. (3½") " 89 mm
83 mm (3¼") " 83 mm
76 mm (3") " 76 mm
70 mm (2¾") " 70 mm
64 mm. (2½") " 64 mm
57 mm. (2¼") " 57 mm
51 mm. (2") " 51 mm
44 mm. (1¾") " 44 mm
Shorts Less than 44 mm
and (less than 1¾")
Rifling
(less than 44 mm)
* Extra Stiff bristles are such bristles as are obtained from pigs but not from wild pigs and are thicker and stiffer than stiff/semi bristles.
** The following co lour tolerances shall be allowed :-
(a) In grades 114 mm. and over, non-whites shall not exceed 3 per cent,
(b) In grade 108 mm. to 44 mm. non-whites shall not exceed 6¼ per cent.
(c) In shorts and rifling, non-whites shall not exceed 12½ Per cent.
@ All bristles shall have root-ends and flag-ends pointing in opposite directions and shall be “solid dressed” which term shall mean such dressing as to contain :—
(i) a minimum of 85 percent of the specified grade designation length (called “tops”), the balance being made up of the next two lower grade lengths and
unavoidable, the maximum tolerance for the latter being 5 percent in the case, of grade designations 102 mm and over;
(ii) a minimum of 75 percent of the specified grade designation length (called “tops”), the balance being made up of the next two lower grade lengths and
unavoidable, the maximum tolerance for the latter being 8 per cent in the case of grade designations 95 mm to 64 mm;
(iii) for grades 57 mm. and 51 mm. a minimum of 75 percent of bristles of the specified grade designation length (called “tops”), the balance being made up of the
next lower grade lengths and unavoidable; and
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (called “tops”), the balance being made up of the next lower
grade lengths and unavoidable; and
(v) The following tolerance limits in respect of types shall be permitted:
Grade designation Maximum percentage of Bristles of the next lower type
according to the stiffness to be tolerated.
114 mm (4½") and above 35
83 mm (3¼”) and up to and including 40
108 mm (4¼")
44 mm (l¾”) and up to and including 45
76 mm (3")
43
SCHEDULE II
(See Rules 2 and 3)
Grade designations and definition of quality of bristles known commercially as *Extra Stiff Bristles produced in India.
Special characteristics
(Grade designation) --------------------------------------------------- General Characteristics
Co lour** Length @
(1) (2) (3) (4)
159 mm (6¼" and over) Black 159 mm and The bristles shall be the natural product obtained from pigs
and over over and shall be thoroughly washed, clean and dry in their
152 mm.. (6") " 152 mm natural co lour with root ends @ intact and free from damaged
146 mm. (5¾") " 146 mm or reclaimed bristles obtained from brushes as well as from all
140 mm (5½") " 140 mm foreign matter, such as dust, dirt, or ox or horse tail hair or
133 mm (5¼") " 133 mm vegetable fibers or artificial fibers.
127 mm. (5") " 127 mm
121 mm. (4¾") " 121 mm
114 mm. (4½") " 114 mm
108 mm. (4¼") " 108 mm
102 mm. (4") " 102 mm
95 mm (3¾") " 95 mm
89 mm. (3½") " 89 mm
83 mm (3¼") " 83 mm
76 mm (3") " 76 mm
70 mm (2¾") " 70 mm
64 mm. (2½") " 64 mm
57 mm. (2¼") " 57 mm
51 mm. (2") " 51 mm
44 mm. (1¾") " 44 mm
Shorts and Rifling (less than 1¾") " Less than 44mm
(Less than 44 mm)
* Extra Stiff bristles are such bristles as are obtained from pigs but not from wild pigs and are thicker and stiffer than stiff/semi
stiff bristles.
** The following co lour tolerances shall be allowed:-
(a) In grades 114 mm. and over, non-blacks shall not exceed 3 per cent,
(b) In grade 108 mm. to 44 mm. non-blacks shall not exceed 6¼ per cent.
(c) In shorts and rifling, non-blacks shall not exceed 12½ Per cent.
@ All bristles shall have root-ends and flag-ends pointing in opposite directions and shall be “solid dressed” which term shall mean
such dressing as to contain:—
(i) Minimum of 85 percent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 5 percent in the case, of grade designations
102 mm and over;
(ii) a minimum of 75 percent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 8 per cent in the case of grade designations 95
mm to 64 mm;
(iii) for grades 57 mm. and 51 mm. a minimum of 75 percent of bristles of the specified grade designation length (called “tops”), the
balance being made up of the next lower grade lengths and unavoidable;
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (called “tops”), the balance
being made up of the next lower grade lengths and unavoidable;
(v) The following tolerance limits in respect, of types shall be permitted :
Grade designation Maximum percentage of Bristles of the next lower type
according to the stiffness to be tolerated.
114 mm (4½") and above 35
83 nun (3¼”) and up to and including 40
108 mm (4¼")
44 mm (l¾”) and up to and including 45
76 mm (3")
44
SCHEDULE III
(See Rules 2 and 3)
Grade designation and definition of quality of bristles known commercially as *Extra Stiff Bristles produced in India
Special characteristics
Grade designation --------------------------------------------------- General Characteristics
Co lour**Length @
(1) (2) (3) (4)
159mm. and over (6¼" and over) Grey 159mm The bristles shall be natural product
and over obtained from pigs, and shall be thoroughly washed
152 mm. . . . (6") " 152 mm. clean and dry in their natural co lour with
146 mm. . . . " 146 mm root-ends @ intact and free from damage or reclaimed
140 mm. . . . (5½") " 140 mm. bristles obtained from brushed as well as
133 mm. . . . (5¼") " 133 mm. from all foreign matter such as dust, dirt
127 mm. . . . (5") " 127 mm. or ox or horse tail hair or vegetable fibers
121 mm. . . . (4¾") " 121 mm. or artificial fibers.
114 mm. . . . (4½") " 114 mm.
108 mm. . . . (4¼") " 108 mm.
102 mm. . . . (4") " 102 mm.
95 mm. . . . (3¾") " 95 mm.
89 mm. . . . (3½") " 89 mm.
83 mm. . . . (3¼") " 83 mm.
76 mm. . . . (3") " 76 mm.
70 mm. . . . (2¾") " 70 mm.
64 mm. . . . (2½") " 64 mm.
57 mm. . . . (2¼") " 57 mm.
51 mm. . . . (2") " 51 mm.
44 mm. . . . (1¾") " 44 mm.
Shorts and Rifling (Less than 1¾") Less than 44 mm
(Less than 44 mm.)
* Extra Stiff Bristles are such bristles are as obtained from pigs, but not from wild pigs and are thicker and stiffer than Stiff/Semi-
stiff bristles.
** All bristles which do not consist wholly of black or white bristles respectively shall be classed as “Grey”. The group may also
contain bristles of co lour other than black and white.
@ All bristles shall have root-end and flag-end pointing in opposite directions and shall be “Solid dressed” which terms shall mean
such dressing as to contain :-
(i) a minimum of 85 per cent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 5 per cent in the case of grade designations
102 mm. and over ;
(ii) a minimum of 75 percent of the specified grade designation length (called ‘tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 8 per cent in the case grade designation 95
mm to 64 mm.;
(iii) for grades 57 mm and 51 mm. a minimum of 75 per cent of bristles of the specified grade designations length (called “tops”),
the balance being made up of the next lower grade length and unavoidable;
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (call “tops”), the balance being
made up of the next lower grade lengths and unavoidable; and
(v) The following tolerance limits in respect of types shall be permitted :
Grade designation Maximum percentage of Bristles of the next tower type
according or stiffness to be tolerated
114 mm. (4½") and above 35
83 mm. (3¼") and up to and including 40
108 mm. (4¼”)
44 mm. (1¾") and up to and including 45
76 mm. (3")
45
SCHEDULE IV
(See Rules 2 and 3)
Grade designations and definitions of quality of bristles known commercially as *Stiff/semi-Stiff bristles produced in India
Grade Special characteristics
designation —————————— General Characteristics
Co lour** Length @
(1) (2) (3) (4)
159 mm. and over (6¼ white 159 mm. The bristles shall be the natural product obtained from pigs,
and over) and over and shall be thoroughly washed, clean and dry in their natural
152 mm. . . (6") “ 152 mm. co lour with root-ends@ intact and free from damaged or
146mm. . . (5¾") “ 146 mm. reclaimed bristles obtained from brushed as well from all
140 mm. . . (5½") “ 140 mm. foreign matter such as dust dirt or ox or horse tail hair or
133 mm. . . (5¼") “ 133 mm. vegetable fibers or artificial fibers.
127 mm. . . (5") “ 127 mm.
121 mm. . . (4¾") “ 121 mm.
114 mm. . . (4½") “ 114 mm.
108 mm. . . (4¼") “ 108 mm.
102 mm. . . (4") “ 102 mm.
95 mm. . . (3¾") “ 95 mm.
89 mm. . . (3½") “ 89 mm.
83 mm. . . (3¼") “ 83 mm.
76 mm. . . (3") “ 76 mm.
70 mm. . . (2¾") “ 70 mm.
64 mm. . . (2½") “ 64 mm.
57 mm. . . (2¼") “ 57 mm.
51 mm. . . (2") “ 51 mm.
44 mm. . . (1¾") “ 44 mm.
Short and Rifling (Less than1¾”) Less than 44 mm
(Less than 44 mm)
* Stiff/Semi-Stiff bristles are such bristles as are not soft or extra stiff.
** The following co lour tolerances shall be allowed :-
(a) In grades 114 mm. and over, non-whites shall not exceed 3 per cent.
(b) In grades 108 mm. to 44 mm., non-whites shall not exceed 6¼” per cent.
(c) In Shorts and Rifling non-white shall not exceed 12½” per cent.
@ All bristles shall have root-ends and flag-ends pointing in opposite directions and shall be “solid dressed” which terms shall
mean such dressing as to contain :-
(i) a minimum of 85 per cent of the specified grade designation length (called “tops”) the balance being made up to the next two
lower grade lengths and unavoidable, the maximum tolerance for latter being 5 per cent in the case of grade designations 102
mm. and over;
(ii) a minimum of 75 per cent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 8 per cent in the case of the grade
designations 95 mm. to 64mm;
(iii) for grades 57 mm and 51 mm. a minimum of 75 per cent of bristles of the specified grade designation length (called “tops”),
the balance being made up of the next lower grade lengths and unavoidable;
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (called “tops”), balance being
made up of the next lower grade lengths and unavoidable; and
(v) The following tolerance limits in respect of types shall be permitted:
Grade designation Maximum percentage of Bristles of the next lower type
according to stiffness to be tolerated
114 mm (4½") and above . . 35
83 mm. (3¼") and up to and including 40
108 mm. (4¼”)
44 mm (1¾") and up to and including 45
76 mm. (3")
46
SCHEDULE V
(See Rules 2 and 3)
Grade designations and definition of quality of bristles known commercially as *Stiff/Semi-Stiff bristles produced in India
Grade Special characteristics
designation ————————————— General Characteristics
Co lour** Length @
(1) (2) (3) (4)
159 mm. and (6¼" and Black 159 mm. and The bristles shall be the natural product obtained from pigs,
over) over and shall be thoroughly washed, clean and dry in their
152 mm. . . (6") “ 152 mm. natural co lour with root-ends@ intact and free from
146mm. . . (5¾") “ 146 mm. damaged or reclaimed bristles obtained from brushes as
140 mm. . . (5½") “ 140 mm. well as from all foreign matter such as dust, dirt, or ox or
133 mm. . . (5¼") “ 133 mm. horse tail hair or vegetable fibers or artificial fibers.
127 mm. . . (5") “ 127 mm.
121 mm. . . (4¾") “ 121 mm.
114 mm. . . (4½") “ 114 mm.
108 mm. . . (4¼") “ 108 mm.
102 mm. . . (4") “ 102 mm.
95 mm. . . (3¾") “ 95 mm.
89 mm. . . (3½") “ 89 mm.
83 mm. . . (3¼") “ 83 mm.
76 mm. . . (3") “ 76 mm.
70 mm. . . (2¾") “ 70 mm.
64 mm. . . (2½") “ 64 mm.
57 mm. . . (2¼") “ 57 mm.
51 mm. . . (2") “ 51 mm.
44 mm. . . (1¾") “ 44 mm.
Short and Rifling (Less than 1¾") “ Less than 44mm
(Less than 44 mm)
* Stiff/Semi-Stiff bristles are such bristles as are not soft or extra stiff.
** The following co lour tolerances shall be allowed :-
(a) In grades 114 mm. and over, non-blacks shall not exceed 3 per cent.
(b) In grades 108 mm. and to 44 mm., not-black shall not exceed 6¼ per cent
(c) In shorts and Rifling, non-blacks shall not exceed 12½ per cent.
@ All bristles shall have root-ends flag-ends pointing in opposite directions and shall be “solid dressed’ which term shall mean
such dressing as to contain-
(i) a minimum of 85 per cent of the specified grade designation length called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance of the latter being 5 per cent the case of grade designation 102
mm. and over;
(ii) a minimum of 75 percent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance of the latter being 8 per cent the case of grade designation
95mm. to 64mm;
(iii) for grade 57 mm and 51 mm. a minimum of 75 per cent of bristles of the specified grade designation length (called” tops”),
the balance being made up of the next lower grade lengths and unavoidable;
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (called “tops”), the balance
being made up of the next lower grade lengths and unavoidable; and
(v) The following tolerance limits in respect of types shall be permitted :
____________________________________________________________________________________________________________
Grade designation Maximum percentage of Bristles of the next lower types according
to stiffness to be tolerated
114 mm. (4½") and above . . 35
83 mm. (3¼") and up to and including 40
108 mm. (4¼")
44 mm. (1¾") and up to and including 45
76 mm. (3")
47
SCHEDULE VI
(See Rules 2 and 3)
Grade designations and definition of quality of bristles known commercially as *Stiff/semi-Stiff bristles produced in India
Grade Special characteristics
designation ——————————— General characteristics
Colour** Length @
(1) (2) (3) (4)
159 mm.& over (6¼” and over) Grey 159 mm. and The bristles shall be the natural product
over) obtained from pigs, and shall be thoroughly
152 mm. . . (6") “ 152 mm. washed, clean and dry in their natural
146mm. . . (5¾") “ 146 mm. color with root-ends@ intact and free from
140 mm. . . (5½") “ 140 mm damaged or reclaimed bristles obtained
133 mm. . . (5¼") “ 133 mm . from brushes as well from all foreign matter
such as dust, dirt, or ox or horse tail hair or
127 mm. . . (5") “ 127 mm. vegetable fibers or artificial fibers.
121 mm. . . (4¾") “ 121 mm.
114 mm. . . (4½") “ 114 mm.
108 mm. . . (4¼") “ 108 mm.
102 mm. . . (4") “ 102 mm.
95 mm. . . (3¾") “ 95 mm.
89 mm. . . (3½") “ 89 mm.
83 mm. . . (3¼") “ 83 mm.
76 mm. . . (3") “ 76 mm.
70 mm. . . (2¾") “ 70 mm.
64 mm. . . (2½") “ 64 mm.
57 mm. . . (2¼") “ 57 mm.
51 mm. . . (2") “ 51 mm.
44 mm. . . (1¾") “ 44 mm.
Short and Rifling (Less than 1¾") “ Less than 44
(Less than 44 mm) mm
* Stiff/Semi-Stiff bristles are such bristles as are not soft or extra stiff,
** All bristles which do not consist wholly or black or white bristles respectively shall be classed as “Grey”. The Group may
also contain bristles or colors other than black and white.
@ All bristles shall have root-ends and flag-ends pointing in opposite directions and shall be “solid dressed’ which term shall
mean such dressing as to contain :-
(i) a minimum of 85 per cent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 5 percent in the case of grade designation
102. mm. and over;
(ii) a minimum of 75 percent of the specified grade designation lengths (called “tops”), the balance being made up of the next
two lower grade lengths and unavoidable, the maximum tolerance for the latter being 8 per cent in the case of grade
designations 95 mm to 64 mm.
(iii) for grade 57 mm and 51 mm. a minimum of 75 per cent of bristles of the specified grade designation length (called “tops”),
the balance being made up of the next lower grade lengths and unavoidable :
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (called “tops”), the balance
being made up of the next lower grade lengths and unavoidable; and
(v) The following tolerance limits in respect of types shall be permitted :
____________________________________________________________________________________________________________
Grade designation Maximum percentage of Bristles of the next lower type according
to stiffness to be tolerated
114 mm. (41") and above . . . 35
83 mm. (31") and up to and including 40
108 mm. (41"
44 mm. (11") and up to and including 45
66 mm. (3’’)
48
SCHEDULE VII
(See Rules 2 and 3)
Grade designations and definition of quality of bristles known commercially as *Soft bristles produced in India
Grade Special characteristics
designation -----------------------------------
Co lour** Length @ General characteristics
(1) (2) (3) (4)
159 mm. & over (6¼" and Grey 159 mm The bristles shall be the natural product obtained from pigs,
over) and over and shall be thoroughly washed, clean and dry in their natural
152 mm. . . (6") “ 152 mm. color with root-ends@ intact and free from damaged or
146mm. . . (5¾") “ 146 mm. reclaimed bristles obtained from brushes as well from all
140 mm. . . (5½") “ 140 mm. foreign matter such as dust, dirt, or ox or horse tail hair or
133 mm. . . (5¼") “ 133 mm. vegetable fibers or artificial fibers.
127 mm. . . (5") “ 127 mm.
121 mm. . . (4¾") “ 121 mm.
114 mm. . . (4½") “ 114 mm.
108 mm. . . (4¼") “ 108 mm.
102 mm. . . (4") “ 102 mm.
95 mm. . . (3¾") “ 95 mm.
89 mm. . . (3½") “ 89 mm.
83 mm. . . (3¼") “ 83 mm.
76 mm. . . (3") “ 76 mm.
70 mm. . . (2¾") “ 70 mm.
64 mm. . . (2½") “ 64 mm.
57 mm. . . (2¼") “ 57 mm.
51 mm. . . (2") “ 51 mm.
44 mm. . . (1¾") “ 44 mm.
Short and Rifling (Less than 1¾") “ Less than 44
(Less than 44 mm) mm
* Soft bristles are such bristles as are soft, and thinner than stiff/semi-stiff bristles.
** The following color tolerances shall be allowed:-
a) In grades 114 mm. and over, non whites shall not exceed 3 percent.
b) In grade 108 mm. to 44mm. non whites shall not exceed 6¼ per cent.
c) in shorts and Rifling, non-whites shall not exceed 12½ percent.
@ All bristles shall have root-ends and flag-ends pointing in opposite directions ans shall be “solid dressed’ which terms shall
mean such dressing as to contain :-
(i) a minimum of 85 per cent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 5 percent in the case of grade designation 102.
mm. and over;
(ii) a minimum of 75 percent of the specified grade designation lengths (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the letter being 8 percent in the case of grade designations 95
mm. to 64 mm.
(iii) for grade 57 mm and 51 mm. a minimum of 75 per cent of bristles of the specified grade designation length (called ‘tops’),
the balance being made up of the next lower grade lengths and unavoidable; and
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (called “tops”), the balance
being made up of the next lower grade lengths and unavoidable.
49
SCHEDULE VIII
(See Rules 2 and 3)
Grade designations and definition of quality of bristles known commercially as *Stiff/semi-Stiff bristles produced in India
Grade designation Special characteristics
------------------------------ General characteristics
Co lour** Length @
(1) (2) (3) (4)
159 mm. & over (6¼" and Black 159 mm. and The bristles shall be the natural product obtained from pigs,
over) over and shall be thoroughly washed, clean and dry in their natural
152 mm. . . (6") “ 152 mm. color with root-ends@ intact and free from damaged or
146mm. . . (5¾") “ 146 mm. reclaimed bristles obtained from brushes as well from all
140 mm. . . (5½") “ 140 mm. foreign matter such as dust, dirt, or ox or horse tail hair or
133 mm. . . (5¼") “ 133 mm. vegetable fibers or artificial fibers.
127 mm. . . (5") “ 127 mm.
121 mm. . . (4¾") “ 121 mm.
114 mm. . . (4½") “ 114 mm.
108 mm. . . (4¼") “ 108 mm.
102 mm. . . (4") “ 102 mm.
95 mm. . . (3¾") “ 95 mm.
89 mm. . . (3½") “ 89 mm.
83 mm. . . (3¼") “ 83 mm.
76 mm. . . (3") “ 76 mm.
70 mm. . . (2¾") “ 70 mm.
64 mm. . . (2½") “ 64 mm.
57 mm. . . (2¼") “ 57 mm.
51 mm. . . (2") “ 51 mm.
44 mm. . . (1¾") “ 44 mm.
Short and Rifling (Less than 1¾" “ Less than 44
(Less than 44 mm) mm
* Soft bristles are such bristles as are soft, and thinner than stiff/semi-stiff bristles.
** The following co lour tolerances shall be allowed:-
A. In grades 114 mm. and over, non -blacks shall not exceed 3 percent.
B. In grade 108 mm. to 44mm, non-blacks shall not exceed 6¼ per cent.
© in shorts and Rifling, non-blacks shall not exceed 12½ percent.
C. All bristles shall have root-ends flag-ends pointing in opposite directions and shall be “solid dressed’ which terms shall mean
such dressing as to contain :-
(i) a minimum of 85 per cent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 5 per cent the case of grade designation 102.
mm. and over;
(ii) a minimum of 75 percent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 8 per cent in the case of grade designations 95
mm. to 64mm
(iii) for grade 57 mm and 51 mm. a minimum of 75 per cent of bristles of the specified grade designation length (called” tops”), the
balance being made up of the next lower grade lengths and unavoidable : and
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (called “tops”), the balance
being made up of the next lower grade lengths and unavoidable.
50
SCHEDULE IX
(See Rules 2 and 3)
Grade designations and definition of quality of bristles known commercially as *Stiff/semi-Stiff bristles produced in India
Grade Special characteristics
designation ----------------------------------------- General characteristics
Co lour** Length @
(1) (2) (3) (4)
159 mm.& over (6¼" and Grey 159 mm. and The bristles shall be the natural product obtained from pigs,
over) over and shall be thoroughly washed, clean and dry in their natural
152 mm. . . (6") “ 152 mm. color with root-ends@ intact and free from damaged or
146mm. . . (5¾”) “ 146 mm. reclaimed bristles obtained from brushes as well from all
140 mm. . . (5½”) “ 140 mm. foreign matter such as dust, dirt, or ox or horse tail hair or
133 mm. . . (5¼") “ 133 mm. vegetable fibers or artificial fibers.
127 mm. . . (5") “ 127 mm.
121 mm. . . (4¾”) “ 121 mm.
114 mm. . . (4½”) “ 114 mm.
108 mm. . . (4¼") “ 108 mm.
102 mm. . . (4") “ 102 mm.
95 mm. . . (3¾") “ 95 mm.
89 mm. . . (3½") “ 89 mm.
83 mm. . . (3¼") “ 83 mm.
76 mm. . . (3") “ 76 mm.
70 mm. . . (2¾") “ 70 mm.
64 mm. . . (2½") “ 64 mm.
57 mm. . . (2¼") “ 57 mm.
51 mm. . . (2") “ 51 mm.
44 mm. . . (1¾") “ 44 mm.
Short and Rifling (Less than 1¾") “ Less than 44mm
(Less than 44 mm)
* Soft bristles are such bristles as are soft, and thinner than stiff/semi-stiff bristles.
** All bristles which do not consist wholly of black or white bristles respectively shall be classed as “Grey” The group may also
contain bristles of colors other than black and white.
@ All bristles shall have root-ends and flag-ends pointing in opposite directions and shall be “solid dressed” which term shall
mean such dressing as to contain :-
i) a minimum of 85 percent of the specified grade designation length (called “tops”), the balance being made up the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 5 percent in the case of grade designations
102 mm and over.
ii) a minimum of 75 percent of the specified grade designation length (called “tops”), the balance being made up of the next two
lower grade lengths and unavoidable, the maximum tolerance for the latter being 8 percent in the case of grade designation
95mm to 64 mm;
(iii) for grades 57 mm and 51 mm. a minimum of 75 per cent of bristles of the specified grade designation length (called” tops”),
the balance being made up of the next lower grade lengths and unavoidable; and
(iv) for grade 44 mm. a minimum of 65 per cent of bristles of the specified grade designation length (called “tops”), the balance
being made up of the next lower grade lengths and unavoidable.
51
SCHEDULE IX-A
(See Rules 2 and 3)
Grade designations and definition of quality of cut bristles
Grade Special characteristics
designation ___________________________ General Characteristics
Co lour** Length@
1 2 3 4
Length as specified in the firm White Extra stiff cut bristles with flag ends 1. Cut bristles with flag ends shall
order* be obtained by cutting root ends of
Lengths as specified in the firm order* Do Extra stiff cut bristles wit root ends bristles conforming to any grade
Designation from 57 mm and a above
Lengths as specified in the firm order* Do. Stiff/Semi-stiff cut bristles with flag as prescribed in Schedules 1 to XI.
ends.
Length as specified in the firm order* Do. Stiff/Semi-stiff cut bristles with 2. Cut bristles with root ends shall
root ends. be obtained by cutting flag ends or
bristles conforming to any grade
Length as specified in the firm order* Do. Soft cut bristles with flag ends. designation from 57 mm and above
as prescribed in Schedule I to IX.
Length as specified in the firm order* Do. Soft cut bristles with root ends 3. Cut bristles of each type shall be
packed separately.
Length as specified in the firm order* Black Extra stiff cut bristles with flag ends. 4. The entire operation of cutting
the bristles for obtaining the cut
Lengths as specified in the firm order* Do. Extra stiff cut bristles with root ends. bristles shall be carried out under
the supervision of an officer of the
Directorate of Marketing and
Inspections.
Length as specified in the firm order * Do. Stiff/Semi-stiff cut bristles with flag 5. Bundles of Bristles can have root/
ends flag ends and cut ends in opposite
or same direction.
Lengths as specified in the firm order* Do. Stiff/semi-stiff cut bristles with root 6. all cut bristles shall be solid dressed
ends. and shall have the same meaning as
given in the foot note to Schedules I to
Lengths as specified in the firm order* Do. Soft cut bristles with flag ends. IX except that length of the cut bristles
near to any grade/designation length
Lengths as specified in the firm order* Do. Soft cut bristles with root ends. given in schedules I to IX shall be
taken as specified grade designation
Lengths as specified in the firm order* Grey Extra-stiff cut bristles with flag ends. length (called ‘tops’) for the purpose of
ascertaining tolerance limits in lengths.
Lengths as specified in the firm order* Do. Extra-stiff cut bristles with root ends.
Lengths as specified in the firm order* Do. Stiff/Semi-stiff cut bristles with flag 7. Color tolerance limits shall be the
ends same as that prescribed for bristles from
Lengths as specified in the firm order* Do. Stiff/Semi-stiff cut bristles with root which cut bristles have been obtained.”
ends
Lengths as specified in the firm order* Do. Soft cut bristles with flag ends.
Lengths as specified in the firm order* Do. Soft cut bristles with root ends.
* Firm Order” means that the entire value of goods contracted for should have been obtained advance by opening cent-per-cent irrevocable letter of
credit in India which is en cashable on the production of shipping bill supported by receipt of shipment or guaranteed in any other way.
52
SCHEDULE X
(See Rules 2(2) and (3)
Special Grades of Bristles
addition to the requirements specified for General Grades in Schedules I to IX, special Grades of bristles shall satisfy the following
requirements, namely:-
(1) Subject to the tolerance limits specified below, all bristles shall be free from nits (egg capsules left by hog lice), and.-
(i) bundles of bristles shall not contain more than 8 infested hairs per bundle up to and inclusive of 95 mm (3¾") in
length; and
(ii) bundle of bristles shall not contain more than 5 infested hairs per bundle exceeding 95 mm. (3¾") in length.
(2) The following co lour tolerance limits shall be allowed-
(i) in grade 114 mm. (4½") and over, non-whites (in the case of whites) and non-black (in the case of blacks) shall not
exceed 1 per cent;
(ii) in grades 108 mm. to 44 mm., (4¼" to 1¾"), non-whites (in the case of whites) and non-blacks the case of blacks) shall
not exceed 2 per cent: and
(iii) in Shorts and Rifling, non-whites) (in the case of white) and non-blacks (in the case of blacks) shall not exceed 3 per
cent.
(3) All bristles shall have root-ends and flag-ends pointing in opposite directions and shall be “solid dressed” which term shall
mean such dressing as to contain-
(i) a minimum of 85 per cent of the specified grade designation length (called “tops), the balance being made p of the next two
lower grade length and unavoidable, the maximum tolerance for the latter being 3 per cent in the case of grade designations
102 mm. and over (4" and over),
(ii) a minimum of 75 per cent of the specified grade designation length (called “tops”), the balance being made up to the next
two lower grade lengths and unavoidable, the maximum tolerance for the latter being 5 per cent in the case of the grade
designation 95 mm. and to 64 mm. (31/4" to 2 ½")
(iii) for grades 57 mm. and 51 mm. (2¼" and 2"_ a minimum of the 75 per cent of bristles of the specified grade designation
length (called “tops”), the balance being made up the next lower grade lengths and unavoidable ; and
(iv) for grade 44 mm (1¾") a minimum of 65 percent of bristles of the specified grade designation length (called “Tops”) the
balance being made up of the next lower grade length and unavoidable.
SCHEDULE X-A
(See Rules 2(2) and (3)
In addition to the requirements specified for cut bristles in Schedule IX-A, Special grade cut bristles shall satisfy the following
requirements namely
1. (i) Special Grade Cut Bristles with flag ends shall be obtained by cutting root ends of special Grades of Bristles of lengths 57 mm.
and above conforming to requirements specified in Schedule X;
(ii) Special Grade Cut Bristles with root ends shall be obtained by cutting flag ends of Special Grades of Bristles of lengths 57 mm
and above conforming to requirements specified in Schedule X
2. Co lour tolerance limits shall be the same as that prescribed for bristles from which cut bristles have been obtained
SCHEDULE XI
(See Rules 2(2) (3)
Select Grades of Bristles
In addition to the requirements specified for general Grades in Schedules I to XI and for Special Grade in Schedule X, select Grades
of Bristles shall be free from nits (egg capsules left by hog lice) and-
(i) bundles of bristles shall not contain more than 16 infested hairs per bundle up to and inclusive of 95 mm (3¾) in length; and
(ii) bundles of bristles shall not contain more that 10 infested hairs per bundle exceeding 95 mm. (3¾) in length.
53
SCHEDULE XI-A
(See Rules 2(2) and (3)
Select Grade Cut bristles
In addition to the requirement specified for Special grade Cut Bristles in Schedule X-A select grade designation cut bristles shall be
free from nits egg capsules left by hog lice) and bundles of cut bristles shall not contain more than 10 infested hairs per bundle and
shall be those obtained only from select Grades of bristles.
SCHEDULE XII
(see Rule 4)
Grade Designation Marks for bristles
Map of India
P
R
OD
UCE OF IND
IA
Note:
(1) Principal rules were published in the Gazette of India Part II, Section-3, sub-Section (ii) dated 16-8-1960 vide S. O. No. 3245,
dated 5-8-1969.
(2) First amendment to these rules was published in the Gazette of India, Part II, Section 3, sub-section (ii) dated 15-12-1973 vide
S.O. No. 3484, dated 30-7-1973.
(3) Second amendment published in the Gazette Part II, Section 3 (ii) dated 7-4-1984 under S.O. 1158 dated. 24-3-1984
(4) Third amendment published vide G.S.R. 215 dated 20th April, 1996 appeared on pages 961-962 in the Gazette of India, Part II,
Section 3, Sub Section (i) dated 18-5-1996.
54
BRISTLES GRADING AND MARKING RULES
Previous and next
Questions people ask
Is rule 6 of Bristles Grading and Marking Rules 1969 still in force?
No repeal of Bristles Grading and Marking Rules 1969 is recorded.