Rule 10, The Export (Quality Control and Inspection) Rules, 1964: Specialist Committees
The Export (Quality Control and Inspection) Rules, 1964 - Rule 10
Text of rule 10
Specialist Committees
10. Specialist Committees. – (1) The Council may constitute a specialist
committee under subsection (3) of section 5 for any commodity;
(2) The specialist committee may consist wholly of Council members or
wholly of other persons or partly of Council members and partly of other persons, as the
Council thinks fit.
(3) Where a specialist committee consists of persons other than Council
members, the Council shall, as far as possible, give representation to all or any of the
following namely: -
(i) scientific and technical institutions;
(ii) State Governments;
(iii) concerned industries, and
(iv) persons having intimate knowledge about quality control or
inspection.
(4) The Council may nominate a member of the specialist committee as the
Chairman of the specialist committee.
(5) The procedure at meetings of a specialist committee shall be such as
may be determined by the committee.
(6) A specialist committee may co-opt additional members, who, by virtue of
specific attainment, knowledge or interest, in the opinion of the committee will be able to
assist the committee in the discharge of its functions.
(7) A specialist committee may appoint as many sub-committees, panels or
working groups as it thinks necessary for the expeditious disposal of its work.
(8) Every specialist committee shall examine all technical matters referred to
it by the Council relating to the commodity which should he subjected to compulsory
quality control or inspection or both prior to export (including the establishment, adoption
or recognition of standards for that commodity) and make necessary recommendations
to the Council.
(9) Every specialist committee shall also examine and make
recommendations to the Council on the question of recognition and establishment of
agencies and approval of testing houses, surveyors or samplers.
11. Procedure for quality control and Inspection, - (1)Whenever, for the development
of the export trade of India, the Central Government is of opinion that any commodity
should be subjected to quality control or inspection or both, prior to export, it shall
formulate its proposals with respect to the same.
27
(2) Where any proposals have been formulated under sub-rule (1), the
Central Government shall forward the proposals to the Council and simultaneously
publish the proposals in the Official Gazette with a direction that any objection or
suggestion which any person may like to offer on the proposals may be sent to the
Council within thirty days of such publication.
(3) After the receipt of the proposals under sub-rule (2), the Council may.
having regard to -
(i) the objections and suggestions received from the public;
(ii) the volume and trend of export of such commodity and the scope for
expansion of its export;
(iii) the extent of competition from other countries;
(iv) the need for enforcing quality control or inspection or both for
increasing the sale of such commodity outside India; and
(v) any other relevant factor,
Consider the proposals either at a periodical meeting or at any special meeting
convened for the purpose
(4) At any such meeting, the Council shall formulate its recommendations
regarding the type of quality control or inspection or both and standard specifications
with respect to the commodity and a marker sea I (together with its design, in cases it is
necessary) to indicate that the commodity conforms to (he standard specifications
applicable to it or may require a specialist committee constituted for the purpose to make
recommendations to it in such matter;
(5) Where a specialist committee has been required to make
recommendations under sub-rule (4), it shall, having regard to the matters specified in
sub-rule (3), make its recommendations to the Council as expeditiously as possible.
(6) The recommendations of the Council or, in a case where the
recommendations have been made by a specialist committee, such recommendations
subject to any modifications made by the Council, shall be forwarded by the Council to the
Central Government.
(7) The Central Government shall, after considering the recommendations of
the Council, issue the necessary notification under section 6 or section 8.
Previous and next
← Rule 9Travelling and daily allowancesRule 11 →A. Procedure for Amendment, suspension or cancellation of the certificate
All provisions of The Export (Quality Control and Inspection) Rules, 1964
Questions people ask
Is rule 10 of the Export (Quality Control and Inspection) Rules, 1964 still in force?
No repeal of the Export (Quality Control and Inspection) Rules, 1964 is recorded.