S.O 729 and S.O.730 dated 21-08-1995-S (FISH)
Notification - The Export (Quality Control and Inspection) Act, 1963
- Kind: Notification
- Under: The Export (Quality Control and Inspection) Act, 1963
Text of this notification
REGD. NO. D.L.—-33004/95
The Gazette of India
EXTRAORDINARY
PART II—Section 3—Sub-Section (ii)
PUBLISHED BY AUTHORITY
No. 489] NEW DELHI, MONDAY, AUGUST 21, 1995/SRAVANA 30, 1917
2055 Gl/95—1 (1)
2 THE GAZETTE OF INDIA : EXTRAORDINARY [PA?.T II—SEC 3(II)]
3
4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
*i
6 THE GAZET1E OF INDIA : EXTRAORDINARY LPARI U—SLC. 3(ii)J
7
MINISTRY OF COMMERCE
ORDER
New Delhi, the 21st August 1995
S.O. 729(EJ.—Whereas for the development of
the export trade of India, certain proposals for sub-
jecting Fresh, Frozen and Processed Fish & Fishery
Products 1o quality control and inspection prior, to
cxpoit, were published a required by sub-rule (2) of
rule 11 of the Export (Quality Control and Inspec-
tion) Rnies, 1964 in the Gazette of India, Part-11,
Section 3, Sub-section (ii) dated 1st November, 1994
under the Order of the Government of India in the
Ministry of Commerce No. S. O. 785 (E) dated the
1-11-1994;
2. And. whereas, the objections and suggestions
were invited from all persons likely to be affected
thereby within a period of forty five days of the date
of publication of the said order in the Official
Gazette;
3. And, whereas, the coppies of the said Gazette
were made available to the public on .1-11-1994;
4. And, whereas, the objections and suggestions
received from the public on the said draft have
been LcnM'clered by the Central Government;
5. And, whereas, it is necessary to maintain the
highest quality standards as per the health require-
ment?; oi the importing countries that would encom-
pass the standards like unified directive No. 91|49*3|
EEC ilat<=d the 22 July, 1991 of the European Com-
munity, tbc proposed HACCP of United States of
America, Quality Assurance Standards of Japan.
6. Ami, whereas, fish and fishery products freshly
caught axe in principle free of contamination with
micro-prgciniztn;
7. And, whereas, however, contamination und
f.uhsecjuent decomposition may occur when handled
ai'.d frcaleii unhygienically;
S. And, whereas, therefore, the essential require-
ments should be laid down f,or correct hygienic
handling of Fresh, Frozen and Processed Fish and
Fishery Products at all stages of production and
during j-torage and transport;
9. And whereas, it is the responsibility primarily
of (he foheries industry to ensure that fishery pro-
ducts meet the health requirements (aid down in
this notification:
If). And whereas, it is expedient that these con-
trol meaiiiircs should bn introduced to guarantee the
unifoim application and to ensure smooth operation
(if the provisins of this notification and that the
me;t;LiiL's apply in an identical manner;
11. And whereas, provisions should, therefore,
IK m;idc for procedure for monitoring to ensure the
above conditions of equivalence with reference to the
requirements of importing countries;
12. And whereas, the Government nominated
competent authority should ensure the effective com-
pliance ot the qualiy standards in the country;
& THE GAZETTE OF INDIA : EXTRAORDINARY | P v : - II—SEC. 3fii)J
13. Now, therefore, in exercise of the powers
conferred by section 6 of the Export (Quality Con-
trol and Inspection) Act, 1963 (22 of 1963) and in
supcrcessicn of the Notification in the Ministry of
Commerce No. S.O. 1153 dated the 9th April, 1988
relating lo Frozen Fish and Fishery Products, S.O.
952 dated 30-3-1987 relating lo Frozen Claim Meat
and S.O. 862 dated 12-2-1983 relating to Canned
Fish & Fishery Products, the Central Government,
after consulting the Export Inspection Council, being
of the opinion that it is necessary and expedient to
do so for the development of the export trade of
India, hereby :—
(i) notifies that Fresh, Frozen and Processed
Fish and Fishery Products shall be subject
to quality control, inspection and moni-
toring prior to export.
(ii) specifies that the type of quality control,
inspection and monitoring shall be in ac-
cordance with the export of Fresh Frozen
end Processed Fish and Fishery Products
(Quality Control, Inspection and Moni-
toring) Rules, 1995 as the type of quality
control, inspection and monitoring which
shall be applied to such Fresh, Frozen and
Proccsed Fish & Fishery Products prior to
their export.
(iii,) recognises the specifications as set out in
Schedule 1 appended to this Order as the
standard specifications for Fresh, Frozen
and Processed Fish and Fishery Products.
(iv) prohibits the expon of Fresh, Frozen and
Processed Fish & Fishery Products by a
unit in the course of international trade
unices it conforms to the standard speci-
fications applicable to it, and is accom-
panied by a certificate seating that such
unit is approved and monitored by the
Export Inspection Agencies established
under Section 7(1) of the Export (Quality
Control & Inspection) Act, 1963 (the
competeni authority).
14. In this Order, Fresh. Frozen and Processed
F 's'n u. Fishery Products means :—
all sea water aud fresh water animals or part
thereof, including their roes, in fresh,
chilled, frozen or processed form, but
excluding Frogs.
[F. No. 6|2|94-BI&EP1
A. DIDAR SINGH, Jt. Secy.
Font Note : The principal notifications were pub-
lished vide No. S. O. 1153 dated
9-4-88, S.O. No. 862 dated 12-2-83
and 952 dated 30-3-1987.
SCHEDULE—I
Specifications for Fresh, Frozen and Processed
Fish and Fishery Products recognised as per Section
6(C) of the Export (Quality Control and Inspec-
tion) Aci. 1963 shall be —
(a) National standards of the importing coun-
tries.
or
( b ; Contractual specifications agreed to bet-
ween the foreign buyer and the exporter
provided the same is satisfying the health
and other requirements of the importing
country;
(c) In the absence of (a) or (b) above, the
minimum specifications notified in this
order as Appendix to this Schedule;
(d) In the case of any Fresh, Frozen & Pro-
cesed Fish and Fishery Products for which
no standard is available at (a) , (.b) &
(c) above, the standard formulated by an
Expert Committee coasisting of the follow-
ing members shall be made applicable :—
— Representative from Export Inspection
Agency (Chairman)
- - Representative from the Marine Pro-
ducts Export Development Authority.
— Representative from the Seaiood Ex-
porters' Association of India.
— Representative from Central Institute of
Fishcrv Research Institute.
— Representative from Central Institute
of Fisheries Technology.
— Representative from Central Marine
Fishery Research Institute.
Appendix to Schedule—1
SPECIFICATIONS
1. SPECIFICATIONS FOR SHRIMPS'PRAWNS
(a) General : Appearance and colour shall be
characteristic to the particular type|form of fresh|
freshly cooked shrimps[prawns as the case may be
The material shall be reasonably free from dehydra-
tion, discolouration and black spots. The material
shall not show any sign of deterioration and shall be
free from off odour and foreign odour. The texture
of meat shall be soft and cnsistent and shall have
characteristic flavour oF Frcsh|Coolcec' Shrimps [Prawns.
The prorhid shall be free from extraneous matter.
(h) E
(1)
(2)
(3)
iacteriological ]
Total plate count at
37'C per gm.
maximum
E. coli count
per gm. max.
Coagulase positive
staphylococcus per
gm. max
Salmonella & S.
arizona per 25 gms.
Fresh]ChiJI.;c1
Frozen
5,00.000
20
100
Nil
Cooked |
Boiled
1,00,000
Nil
100
Nil
9
II. SPECIFICATIONS FOR LOBSTERS IN ANY
FORM
(a) General : Appearance and colour shall be
characteristic to the particular typeiform of fresh [
freshly cooked lobsters as the case may be. The
material shall be reasonably free from dehydration,
discolouration and extraneous matter. The product
shall not ,'how any sign of deterioration. The product
shall be free from off odour and any foreign odour.
The material shall be free from extraneous matter like
sand, dirt, etc. The material shall be free from eggs
unless permitted by the buyer. Lobsters of uniform
size shall be packed together. Texture of the meat
shall be aoft and consistent.
(b) B
(1)
(2)
(3)
(4)
•acterioiogical
Total plate count al
3TC per gm.
maximum
E. coli
per gm. max.
Coagulasc positive
sfaphylococcus per
gm. max.
Salmonella & S.
arizona per 25 gms.
FreshjChiiiedi
Frozen
5,00,000
20
100
Nil
Cocked!
Boiled
1,00,000
Nil
100
Nil
III. SPECIFICATIONS FOR CEPHALOPODS
(CUTTLEFISH. SQUID, OCTOPUS ETC.)
AND THEIR BODY PARTS INCLUDING
ROES
(a) General : Cephalopods of different varieties
shall not be packed together. Material of uniform
colour and size sh-?*! be packed together. The oroduct
shall be clean and shall be characteristic to the par-
ticular typejform appearance, colour and odour of
freshjfreshiv coked cephalopods. The products shall
be reasonably free from dehydration, discolouration
and extraneous matter. The produc' shall not show
any sign oi deterioration and shall be free from off
odour and any foreign odour. The texture of meat
sha.ll be soft and consistent.
(b)
(1)
(2)
(3)
(4)
Bacteriological
Total Plate count at 37°C
per gm. max.
E.Coli count per gm. max.
Coagulase positive staphy :
lococcus count per gm. maxi-
mum
Salmonella & S. arizona per
25 gms.
Fresh/Chill-
ed/Frozen
5.00,000
2,00,000 for
products meant
for raw
Consumption
20
100
Nil
Cooked/
Boiled
1,00,COO
Nil
100
Nil
IV. SPECIFICATIONS FOR FISHES—WHOLE
DRESSED, FILLETS OR ANY OTHER
TYPE (POMFRETS, SEER, PEARL SPOT,
SARDINE, MACKEREL, HILSA ETC.)
(a) General : FIsbesjFillets of uniform size and
colour shall be packed together, FishesiFillets of
different species shall not be packed together. The
products shall be clean and shall have appearance,
colour and odour characteristic to the particular
typejform of freshjfreshly cooked fishes. The pro-
ducts shall be free from dehydration and discoloura-
tion. The products shall not show any sign of de-
terioration and shall be free from off odour and any
foreign odour. The products shall be free from soften-
ing of texture and any objectionable extraneous
matter.
V. SPECIFICATIONS FOR CRAB AND CRAB
MEAT
(a) General : CrabJCrab Meat of uniform colour
shall be packed together. Body meat and clawmeat
shall be packed separately or as sandwich pack or
any other manner as required by the buyer. The
material shall be clean having characteristic of the
particular typejform appearance, colour and odour of
freshjfreshly cooked crabs as the case may be and
shall not have deterioration, off odour or any" foreign
odour. The products shall be reasonably free from
dehydration, discolouration and objectionable extra-
neous matter and shall be soft and consistent.
(b) :
0)
(2)
(3)
(4)
Bacteriological
Total Plate count at 37°C
Per gm. maximum
E.coSi count per gm. Max.
Coagulase positive stapbylo-
coccus count per gm.
maximum
Salmonella & S. arizona per
25 gms.
Fresh/Chilled/
Frozen
10,00,000
20
100
Nil
Cooked
/Boiled
1,CO,COC
Nil
100
Nil
(b)
(1)
(2)
(3)
(4)
Bacteriological
Total Plate count at 37°C per
gm. Maximum
E.coli per gm. max.
Coagulate positive staphylo-
coccus per gm.
Salmonella & S. arizona per
25 gms.
Fresh/Chilled/
/Frozen
5,CO,CO0
20
100
Ni!
Cooked/
Boiled
1,00,000
Nil
100
Nil
NOTE :
(1) Crab dipped in boiled water for the pur-
pose of extracting meat shall not be treated
as cooked variety.
2055 GIJ95—2.
THE GAZETTE OF INDIA^ EXTRAORDINARY IPM^-S^ H«|l_
m Cooked crab meat shall bs prepared by
boiling the enviscerated and cleaned crab
for sufficient length of time to make it ht
for direct consumption.
VI. SPECIFICATIONS FOR WHELK
(->) General : Appearance, colour and odour
shalf'be" characteristic to the particular type!form of
fresh'cooked whelk as the case may be. The pro-
ducts iiha-1 reasonably be free from dehydration and
discolouration and shall net have any sign of de-
terioration off odour or any foreign odour. The pro-
ducts shall be free- from extraneous matter end sand
and "hall not show grittiness. Texture shall be soft
end consistent of whelk meat shall be reasonably
free from shell or shell pieces.
NOTE :
The Whelk treated with hot water for removing
the meat from the shell shall be treated as raw.
VII. SPECIFICATIONS FOR CLAMjMUSSEL
MEAT
(a) General.—Appearance and colour of 'he pro-
duct shall be characteristic to the particular type1,
form of fresh'cooked dam [cooked mussel as the case
may be. The product shall reasonably be free from
dehydration and discolouration. The product shall
have characteristic odour of freshjeooked clam!
mussel. The product shall not show any sign of de-
terioration. The product shall be free from off colour,
foreign odour|sand (gr'tiness detected by chewing)
and objectionable foreign matter. The texture of
meat shall be soft and consistent.
(b)
(1)
(2)
(3)
(4)
Bacteriologiocal '
Total Plate count at 37° C
per gm. max.
E. Coll Count per gin. max.
Coagulase positive staphylo-
ccccus count par »m. inaximutT
Sal-.io:'eila & S. arizona per
25 grns.
Fresh/Chilled/
Frozen
10.00,000
20
l- 100
Nil
Cooked/
Boiled
1,00,0C0
Nil
100
Nil
NOTE : Ckm|Mussel treated with hot water for
opening the shell and the meat then packed,
shall noi be treated as cockediboiled varie-
ty.
VIII. SPECIFICATIONS K>R «** J J J
(SHRIMPS) CANNED IN BRINE OR IN A M
OTHER INTERNATIONALLY APPROVED
MEDIUM OR DRY PACK
1. Raw material
1.1 The raw material used for preparation of Pra-
wns (Shrimps.) canned in brine shall be fresh, sound,
wholesome, properly cleaned and free from cn'rails.
1.2 Only refined salt conforming to IS : 594—1962
shall be used.
2. Cans :
2.1 The material shall be packed in suitable infer-
nally and uniformly lacquered cans. The cans may
also be lacquered externally. The lacquer used shall
be such that it does not impart any foreign unpleasant
taste and smell to (he contends of the can and does
not peal off during processing and storage. The lac-
quer shall not be soluble in brine to any extent. The
can exterior shall be free from major dents, rust, per-
forations and seam distortions.
2.2 The cans after sealing harmetically shall not
show leaking, panelling or swell. The interior of the
Can on opening shall not show any visible black dis-
colouration, rust or pitting and the inside lacquer shall
be in good condition.
3. Brine :
3.1 The brine, if used shall be clear and shall not
be discoloured.
4. Packing and Labelling
4.1 Only material of the same species shall be
packd in a Can.
4.2 The labels, if used, shall be in accordance with
the rules and regulations of the country to which the
material is to be exported.
5. Drained weight and size grade :
5.1 The net drained weight of contents shall not
be less than the declared weight-
s ' The size count (Number of pieces per unit
weight) shall conform to the size grade declared on
the Can.
6. Organoloptic Quality :
6.1 The contents of the Can on opening shall present
a good appearance and shall not display any appreci-
able disintegration places from which portions have
separated out would be treated as disintegrated
shrimps.
6.2 The surface of the prawns shall not be slimy
to the touch. The meat shall be soft but firm and
shall not crumble to granular forms when pressed bet-
ween fingers.
6.3 The prawn pieces shall not appear to be press-
ed together and it should be possible to separate the
(b)
0)
(2)
(3)
(4)
3?ct& riological £
Total Plate count at 37° C
per gm. max.
E.Coli count per gm. max.
Colagulase positive staphylo-
coccus count per gm.
maximum
Salmonella & S. arizona pet
25 gms.
Fresh/Chilled/
Frozen
10.00,000
20
100
RNil
Cooked/
Boiled
1,00,000
Nil
100
JNH;
pieces easily. The pieces shall be of uniform size
and shall be clean and free from loose hanging pieces
of meat.
6.4 The material shall have the odour and flavour
of fresh and cooked prawn meat and shall be free
from scorched, bkter or any other objectionable fla-
vour.
6.5 The material shall be free from pale bleached
colour wi'h. a greenish yellow tint indicative of pre-
processed spoilage. The material shall also be free
from any black discolouration.
6.6 The material *shall be free from sand, dirt, in-
sect, hair or any other extraneous matter. It shall be
reasonably free from bits of veins, shall particles and
pieces of appendages.
6.7 The material shall be free from any poisonous
and deleterious substances.
6.8 The Cans on opening shall not give any odour,
indicative of bactarial spoilage, shall not show liqua-
faction of confents and shall not show blackening.
6.9 The product shall also conform to the follow-
ing requirements :
SI. C
No.
(1)
(i)
(U)
OH)
(iv)
(v)
(vi)
fvii)
(vjii)
(13*)
Characteristics
(2)
Vacuum af the can in
mm Hag. min.
Drained weight of the
contents of the can, as
percentage by weight of
thewater capacity of the
can, min.
Sodium chloride in brine
per cent fW/V) Max.
Acidity of brine as
citric acid (anydrous)
per cent (W/V )
Arsenic parts per million
max,
Lead parts, per million,
max.
Copper, parts per million,
max.
Zinc, parts per million,
max.
Tin, parts per million,
max.
Require-
ments
223 <
(3)
100
64
3.5
0.06 to
0.20
1
5
10
50
250
Methods of test
Rcf. to
Appendix
in IS: i
>i960»*
(4>
A
B
C
D
—«
—
—
—
; Appendix
n IS :
2168-
J971*
(5)
—
—
B
C
D
E
F
7. Bacteriological Requirements :
7.1 The initial incubation of the sampled Cans s
be done at 37 ±1 °C for seven days or 35 ± 1°C
fen days. After this incubation, necessary quan
of the liquid portion is aseepticaUy pipetted out r
inoculated into thioglycollate cystine broth and
cubated at 37 ±1"C for 18 hours. The incubai
broth shall not show bacterial growth.
8. Coding ;
8.1 The can shall be embossed with the markin
of grade, size, drained weight, name of th& manufa
lute'r, or his factory code, year, month and batch
manufacture. An illustration for embossing the cof
in the abbreviated form is given below :
TV5 X
4 BOS
T5 stands for 'Tiny' packed with 5 oz. drained weigh'
'X1 stands for tho name of the manufacturer in tli-
abbreviated form or the facfory code. '4' stands fo.
the year of manufacture, and in this illustration it sig-
nifies the year 1994. 'B* stands for the month of
manufacture (here is signifies -he month of February)
and '05' stands for the date of manufacture during the
month. In case POD material is used for running,
the letter 'U' shall be embossed' prior to the marking
for size grade. For the purpose of denoting (he size
grade and the drained weight, the following nomen-
clature shall be followed :
(A) Size-Grade* :
Nomenclature
Colossal (Supwme Jumbo)
Jumbo
Large
Medium
Small
Tiny
Cocktail/Mini/Sealed
Broken/Whole & Broken
Count/ A*
100 gms.
Below 8
9 to 13
14 to 22
23 to 36
37 to 63
64 to 102
103 to above
No limit
'breviation
~~C/3J
J
L
M
S
T
CT/MI
SD
B/WB
*Pack having more than 10% broken pieces by
weight irrespective of the total number of pieces in
the can shall be treated as 'Broken'. Any pieco
showing less than 4 segments shall be treated a;.
broken.
(B) Drained weight:
Except in the case of 4.5 oz. pack, which being the
standard pack, the actual drained weight shall be
embossed in oz. on the Cans.
(C) The mon*h of manufacture shall be designated
as—
Month
January
February
March
Apiil
May
June
Abbrevia-
tion
A
B
C
D
E
F
Month Abbrevi-
ation
July O
August II
September J
October K
November L
December M
1 2 THE GAZETTE OF INDIA : EXTRAORDINARY FPART II—SEC. 3fii)1
iX. SPECIFICATIONS FOR CRAB MEAT CANN-
ED IN ©RINE OR ANY OTHER INTERNA-
TIONALLY APPROVED MEDIUM
1. Raw material:
1.1 The meat used for canning shall be obtained
from healthy freshly caught, crabs of the species
Scylla serreta, Por'unus pelagicus, Neptunus pelagicus
and Neptunus sanquinolenitus.
2. Cans :
2.1 The material shall be packed* in suitable inter-
jially and uniformly lacquered Cans. The Cans may
also be lacquered externally. The lacquer used shall
be such that if does not impart any foreign unpleasant
taste to the contents of the Can and does not peel off
during processing and storage. The lacquer shall not
be soluble in brine to any extent. The Can interior
shall be free from major dents, rust, perforations and
seam distortions.
2.2 The cans after sealing hermetically shall not
show leaking, panelling or swell. The interior of 'he
can on opening shall not show any visible black (bluish
discolouration, rusting or pitting. The inside lacauer
shall be in good condition.
3. Brine.
3.1 Vaccum dried salt or common salt conforming
to IS : 594—1962 shall be used for preparing brine.
The sodium chloride content of the brine, if used,
shall not exceed 2% W(V, maximum.
3.2 Acidity of brine as Citric acid (Anhydrous) shall
be 0.20% W|V. maximum.
4. Packing and Labelling :
4.1 Crab meat shall be packed using parchment
paper lining.
4.2 The body meat and claw meat of the crab shall
be packed according to the terms of contract agreed
upon between the buyer and seller.
In the absence of contractual specifications, the claw
meat shall be packed on the top and at the bottom in
distinctly separate layers,
4.3 Only the meat of one species of crab shall be
packed in a particular Can. The meat obtained from
crabs caught from back waters and sea shall not be
mixed or packed in a particular Can.
5. Drained Weight:
5.1 The net water capacity of the Can shall be as
per the requirements of the importing country.
5.2 The drained weight of the meat shall not be
less than the declared weight.
6. Requirements for finished products :
6.1 The content of the Can on opening shall present
*he characteristic colour and odour of crab meat and
shall not give any foreign odour.
6.2 The material shall be free from scorched, bitter
or any objectionable flavour.
6.3 The material shall be free from stains, dirt,
insect, hair or any other extreneous matter. It shall
be free from veina, membrance shall particles and
piecus of appendages.
6.4 The material shall be free from blush (black
colour.
6.5 The material shall be free from any poisonous
snd deleterious substance.
6.6 Crab meat canned in brine should conform to
the following requirements also :
SI.
No
(1)
(2)
(3)
(4)
Characteristic
Vaccqm in can in mm,
min. Hg.
Sodium Chojoride in
brine per cent by weight
Acidity of brine as citric
acid anhydrous) per cent
(W/V)max imti m
Acid insoluble asch, per ecu
by weight max.
Limits
150
2%
0.2%
it
2%
Methods of test
Retito Appendix
of
IS 7143
1973*
A
1S2236
1968**
A
C
D
-
* Specifications or Crab meat canned in brine
"Specifications or prawns/ Shrimps canned in brine
(First Revision)
TABLE-II LIMITS OF MEATLLIC IMPURITIES
IN CRAB MEAT CANNED IN BRINE
SI..
No
(1)
(2)
(3)
(4)
(5)
Characteristic
Arsenic, ppm Wax.
Lead, ppm. Max :
Copper ppm max.
Zinc ppm, max.
Tin ppm max.
Limits
1
5
10
50
250
Method «£test
Re. to
Appendix
In
2168—1971*
B
C
D
E
F
* Specifications or pomfret caned in oij (First revision)
7. Bacteriological requirements :
The initial incubation of the sampled Cans shall be
done at 37 ± 1" C for seven days or at 35 ± 1 ° C for
ten days. After this initial incubation, the brine ot
«he Cans, on inoculation into, thioglycollate cystine
broth and incubation at 37 ± 1° C for 40 hours, shall
not show any sign of bacterial growth,
table
8. Coding:
8.1 The Cans shall be embossed with the markings
of the drained weight, name of the manufacturer or his
factory code and year, month and date of manufac-
ture. An illustration for embossing the code in the
abbreviated form is given below :
C B 5 X
4 B05
In the above illustration 'CB' stands for Crab Meat
Canned in brine "5" stands for drained weight and,
in this illustration, it signifies 5 oz. drained weight,
"X" stands for the name of the manufacturer in the
abbreviated form or his factory code "4" stands for
the year of the manufacture and in this illustration,
it signifies the year 1994. "B" stands for the month
of manufacture and, in this illustration, it signifies
month of February. "05" stands for the date of
manufacture during the montk
13
The1 months of manufacture shall be designated as :
Month
January
February
March
April
Muy
June
Abbreviation
A
B
C
D
E
F
Month
July
August
September
October
November
December
Abbreviation
G
H
J
K
L
M
8.2 Drained Weight :
Except in the case of 4.5 oz. pack, which being the
siandard pack, the actual drained weight shall be
embossed in oz. on the cans.
14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)J
15
16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART IT—Set. 3(ii)l
17
2055 GI/95—3
1.S THE GAZETTE OF INDJA : EXTRAORDINARY P A R T II—Sfx. 3(ii)J
\?
50 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)J
21
22 THE G A ^ E H F , OF INDIA i EXTRAORDINARY (PARF If—SEC. 3 u i ) f
23
24 THE GAZETTE OF !NDTA : EXTRAORDINARY (PAST I I - -SEC ?fii)J
25
2055 GI/95-4
26 THF: GAZETTE OF 'ND1A : FXTRAORDINARY IP SKI I I - -S tc 3>'ii) 1
27
2b THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)>
29
30 THE GAZER E. OJh INDIA : EXTRAORDINARY IPARJ II—She. 3 u i \
MINISTRY OF COMMERCE
NOTIFICATION
New Delhi, the 21st August, 1995
S.O. 730(E).—In exercise of the powers confer-
red by Section 17 of the Export (duality Control
and Inspection) Act, 1963 (22 of 1963) and in
supersession of Notification No. S. O. 1153 (a) ,
dated 9-4-1988 relating to Frozen Fish and Fishery
Product (Quality Control and Inspection) Rules,
1987 and Notification No. S. O. 863, dated 12-2-1983
relating to canned Fish & Fishery Products (Quality
Control and Inspection) Rules, 1983, and Notifica-
tion Nu. S. O. 953, dated 30-3-1987 relating to
Frozen claim Meat (Quality Control and Inspection)
Rule;;. 1987, except in respect of ihings done or
omitted to be done before such supersession, the Cen-
tral Government hereby makes the following rules,
namely :—
1. Short title and commencement •—(1) These
rules may be called Export of Fresh, Fro-
zen and Processed Fish and Fishery Pro-
ducts (Quality Control and Inspection and
Monitoring) Rules, 1995.
(2) They shall come into force i.n the date of
their publication in the Official Gazette.
2 lo r the purpose of Ihese rules unless the con-
text otherwise requires, the following definitions shall
be applicable :
2.1 'Act' means the Export (Quality Contiol end
Inspection) Act, 1963 (22 of 1963). '
:.j
2.2 'Afcncy* njeans any one of the Export Inspec-
tion Agencies at Bombay, Calcutta, Cochin, Delhi
and Madras established under Section 7 of the Act,
2.3 'Council' means the Export Inspection Coun-
cil established under Section 3 of the Export (Quali-
ty Control and Inspection) Act, 1963.
2.4 'Fresh' Frozen and Processed Fish and Fishery
Products' means all sea water, fresh water animals
or part thereof, including their roes, in fresh, chilled.
frozen or processed form, but excluding frogs.
2.5 'Aqua culture Products' means all fishery p r o
ducts born and raised in controlled conditions until
placed on the market as a foodstuff. However, sea-
water or fresh water fish or crustaceans eaueht in
their natural environment when juvenile and kept
until they reach the desired commercial size for hu-
man consumption are also considered to be equacul-
ture products. Fish and crustaceans of commercial
size caught in their natural environment and kept
alive to be sold at a later date are not considered to
be aquaculturc products if they are merely kept alive
without any attempt being made :o increase their
size or we ight ;
2.6 'Chilling' means the process of cooling fishery
products tc a temperature approaching that of melt-
ing ice.
2.7 'Fresh Products' means any fishery products
whether whole or prepared, including products packa-
ged under vacuum or in a modified atmosphere,
which have not undergone any treatment to ensure
preservation other than chilling.
2.8 'Prepared Products' means any fishery pro-
duct which has undergone an operation affecting its
anatomical wholeness, such as gutting, heading,
slicing, filleting, chopping etc.
2.9 'Processed Products' means any fishery pro-
duct which has undergone a chemical or physical
process such as the heating, smoking, salting, dehy-
dration or marinating, chilling, frozen etc. whether
or not associated with other foodstuffs or a combina-
tion of these various processes.
2.10 'Preserve' means the process whereoy pro-
ducts are packaged in hermatically sealed containers
and subjected to heat treatment to the extent that
any micvo-organisms that might proliferu'e are
destroyed, or inactivated, irrespective of the tempe-
rature ot which the product is to be stored.
2.11 'Frozen Products' means any fishery product
which has undergone a freezing process to ieach a
core temperature of —18"C or lower after tempera-
ture stabilization,
2.12 'Packaging' means the procedure of piotect-
ing fishery products by a wrappc, a container or
any other suitable device,
2.13 'Batch'/'Code' means the quantity of fishery
products processed under practically identical cir-
cuniitancLS during a discrete period of time, how-
ever, not exceeding one calender day.
2.14 'Consignment' means the quantity of fishery
products bound for one customer in the country of
destiint'cr. and convrwr! by one mean1! of transport
only.
2.15 'Means of Transport' means ttiose parts set
aside for goods in automobile vehicles, rail vehicles
and aircraft, the holds of vessels, and containers for
transport by land, s6a or air.
2.16 'Competent Authority' means any one of
the Expoit Inspection Agencies at Bombay, Calcutta,
Cochin, Delhi & Madras established under Section
7 of the E_\port (Quality Control and Inspection)
Act, 1903.
2.17 'F-stablishmcnt' means any premises where
fishery products are prepared, processed, chilled,
frozen, packaged or stored.
2.18 'Clean Sea-water' means Sea water or bring
wrjter which is free from microbiological contamina-
tion, harmful substances and/or toxic marine plank-
U'n in such quantities as may affect health and safety
aspect of fishery products and which is used under
the conditions laid down in this notification.
2.19 'Potable water' means Water used for pro-
cessing which meet tolerance levels as per EEC
Directive No, 80/778-EEC (Quality tolerances for
v-alcr intended for food industry).
2.20 'Factory Vessel' means any vessel on which
fishery products undergo one or more of the follow-
ing operations followed by packaging : filleting,
slicing, skinning, mincing, freezing or processing.
The following are not deemed to be 'factory
vessels* :
— Fishing vessels in which only shrimps
and molluscs are cooked on board ;
- - Fishing vessels on board on which only
ficczing is carried out.
3. Basis of compliance :-—
II is the primary responsibility of the industry to
ensure that the fresh frozen and processed fishery
products intended for export are hapdled, processed
at all stages of production, storage and transport
under proper hygienic conditions so as to meet ihe
health requirements laid down under these Rules
and that the products confojm to the specifications
given in ihe order by the Central Cluveinment under
Section 6 of the Act.
The Competent Authority shall ensure that the
pocessor<; comply with the requirements, by regular
monitoring of the establishments as per the control
measures prescribed in Clause 13 of these rules.
For effective monitoring of the scheme, Export Ins-
pection Council will issue nccessaiy instructions in
this regiud.
4. The fresh, frozen and processed nish mid fish-
ery products for export shall be subjected to the
following conditions :
4.L Any statutory restrictions imposed by any
State /Central Governments with respect to commer-
cial/environmental (conservation measures from time
to time sfcall strictly be adhered to.
32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3<Y,)]
4:2 They raust bave b&eu caught arid where appro-
priate, handled for bleeding, beading, gutting and
removal of fins, chilled or frozen on board vessels
jn accodaiicc with prescribed hygiene rules.
4.3 They must have where appropriate been hand-
led in factoryy vessels approved by the competent
authority as per and in accordance with the requi-
ictncnts specified in Annexure4.
4.4 During and after landing they must have
been handled in accordance with ANNEXURE-II.
4.5 They must have been handled and, where
appropriate, packaged, prepared, processed, frozen,
tlcfros'-.Y! or stored hygienically in establishments
approved in accordance with ANNEXURE-III i>nd
ANNUXURE-IV.
"4 .6 They must have undergone health check in
accordance with ANNEXURE-V.
4.7 They must have been appropriately packaged
in accordance with ANNEXURE-VI.
4.8 They must have been given an identification
niLirk in accordance wilh ANNEXURE-VII.
4.9 The) must have been stored and transported
under satisfactory conditions of hygiene in accor-
dance with ANNEXURE-VIII.
5. Whejc vetting is required from a technical
and Cojnrncicial view point it must be carried out
as quiukfy as possible after the products have been
caught or landed.
6. The aquacuKure products shall be subject to
the following conditions :
(i.l 'ITu-y must either be made headon, shcllon
shrimp or beheaded, deshelkd, gutted, cleaned,
deveined etc. under proper conditions of hygiene.
They must not have been soiled with earth, slime or
iaeces or otherwise contaminated. If not processed
immediately after having been preprocessed they
Must have been chilled.
6.2 The) must in addition, comply with the ap-
propriate Requirements laid down under 4.3 to 4.7.
7. The following Fishery Products shall be for-
Hdrlen h ) export.
(I) Poisonous fish of the following families :
— Tetra udontidae, Molidae,
Diodontidae, Canthigasteridae.
(ii) Fishery products containing biotoxins such
as ciguatera toxins or muscle paralysing
Toxins.
8.1 In the case of export of bivalve molluscs in
processed condition, harvesting, transport, relaying,
purification and processing shall be carried out in
accordance with the requirements of the importing
countries,
5.2 The activities at 8.1 shall be approved ana
regnlnHy monitored by the competent authority
which may take the assistance of representatives
from MPEDA SFEAI and the local fisheries depart-
ment 'fishing harbour.
9. The industry shall etisure that persons icponsi-
ble for the establishment take all necessary measures
so that at all stages of production if fish products
the specifications arc complied with and to that end
the said persons must carry out their own checks
based on the following requirements :
9.1 Identification of critical points in their estab-
lishment on the basis of the manufacuring process
used.
9.2 Establishment and implementation of methods
for monitoring and checking such critical points.
9.3 Taking samples for analysis in an approved
laboratory by the recognised competent authority for
the purpose of checking the cleaning and uis-infec-
lion methods and for the purpose of checking comp-
liance with the requirements m this notification.
9.4 Keeping a written record or record register
in indelible fashion of the preceding points with a
view to submitting them to the compete.it autho'itv.
The results of the different checks and tests will in
particular be kept for a period of at least 2 years.
9.5 Detailed rules for application ef *his clause
have Ken given in ANNEXURE-IX.
9.6 The establishment shall have compctc.it and
qualified technologist duly approved by the competent
authority to conduct own checks and aUied du'ies re-
ferred at Clause 9 above.
9.6.1 The person responsible for the establishment
shall possess one of the qualifications and experience [
training as the case may be.
(i) Graduate|Post Graduate in Fishery Science,
Fishery Management, Industrial Fisheries or
Fish Processing;
(ii) a. Graduate|Post Graduate in Marine Bioloev.
Fishery Biology, Microbiology, Chemistry.
Zoology Biology, Biochemistry, Bioscience
or Food Proccsing Technology; and
b. One years experience in Fish Processing
and Quality Control or Training for mini-
mum 6 months duration in a Government
recotmised institute in 'Fish Process) ni; and
Quality Control,
10. If the results of own checks or anv informa-
tion at the disposal of the persons responsible referred
to above reveal the risk of health or suggest that one
micht exist, appropriate measures shall be taken under
official supervision of the recognised competent
authority.
11. Having satisfied itself that the establishmeni •;
factory vessels meet the requirements with regard to
the nature of the activities they carry out the compe-
tent authority shah" accord approval to such estab-
lishments/factory vessels. If the establishments|
factory vessels, decide to carry out activities other
lhan those for which it has received approval, speci-
fic approval from competent authority shall be ob-
tained for that purpose.
12. The competent authority may take the assistance
of representatives from Marine Products Export Deve-
lopment Authority (MPEDA) and Seafood Exrxrrs'
Association of India CSEAI) of Industry in the
matter of approval of establishment/factory vessel.
33
12.1 Recognised competent authority shall take
necessary measures if the requirements cease to bt
met.
12.2 The recognised competent agency shall draw
up a list of the approved establishmentjfactorv vessels,
each of which shall have an official riumber and the
recognised competent authority shall notify appro-
priate authorities of its list of approved establishments]
factory vessels and any subsequent change thereof.
13. The inspection and monitoring of establishmert|
factory vessel shall be carried out regularly under the
responsibility of the recognised competent authority
which shall at all times have free access to all parts
of the cstublishments|foctory vessel and records per-
taining to application of this notification in order to
ensure compliance with the requirements of tlvs noti-
fication.
14. For inspection and monitoring of bivalve mol-
luscs pre-processing centres and landing centres of
other tish products, the competent authority may take
th; askance of representatives of MPEDA & S1EAI.
15. Certification :
On request from the processor/exporter, the com-
petent authority shall issue Health|veterinary
certificate in the prescribed proforma after
satisfying itself that the Fresh, Frozen, Pro-
cessed Fish and Fisery Products are proces-
sed in approved establishments|factory ves-
sels having valid approval number and after
satisfying the relevant requirements.
15.1 The competent authority shall issue certificates
on request from the exportcr|processor after satisfying
itself that the requirements of the relevant standards
are mel.
16. Fees.
16.1 A fee of Rs. 2,000|- shall be paid by the Pro-
cessing Establishment|Factory Vessel along with the
application for approval as per Clause No. 11 of these
rules.
16.2 A monitoring fee at the following rate shall
also be paid by the Processing Establishment/Fac-
tory Vessel, to the EIA :
Unit Export Turn Over
Under Rs. 10 crores per annum.
Rs. 10 crores and above per
annum.
Monitoring Fee
0.2r'c of F.O.B. value of
exports.
0.15"c with a minimum of
Rs, 2 kikbs and a maximum
of Rs. 5 lakhs.
17. Appeal
17.1 Any person aggrieved b y t
(i) Decision of the competent authority not to
accord approval as per rule 11 of this noti-
fication:
(ii) Decision of the Competent Authority to
withdraw approval as per Rule 12.] of this
notification;
(iii) Refusal of Competent Authority to issue
Health[Veterinary Certificate as per Rule 15
of this notification-—
May prefer an appeal within 10 days of re-
ceipt of such communication to an Ap-
pellate Authority appointed by the Central
Government.
17.2 At least two-thirds of the total membership of
the Appellate Authority shall consist of non-officials.
17.3 The quorum for any meeting at the Appellato
Authority shall be three.
17.4 The appeal shall be disposed of within 15 days
of its receipt.
ANNEXURE—\
CONDITIONS APPLICABLE TO FACTORY
VESSELS
]. Conditions concerning design and equipment.
1. The minimum requirements for factory vesseli
are i's follows :
J.I A reception area set aside for taking fishery
products onboard designed and arranged into pounds
or pens that are large enough to allow each successive
catch to be separated. The reception area and its
movable parts must be easy to clean. It must be de-
signed in such a way as to protect the products from
the sun or the elements and from any source of dirt
or contamination.
1.2 A system for conveying fishery products from
the reception area to the work area that conform*
with rules of hygiene ;
1.3 Work areas that are large enough for the pre-
paration and processing of fishery products in proper
conditions of hygiene. They must be designed and
arranged in such a way as to prevent any contamina-
tion of the products;
1.4 Storage for the finished products that are large
enough and designed so that they are easy to clean.
If a Waste processing Unit operates on board a sepa-
rate hold must be designated for the storage of these
by-products ;
1.5 A place for storing packaging materials that
is separate from the product preparation and process-
ing areas;
1.6 Special equipment for pumping, was'e or fishery
products that are unfit for human consumption either
directly into the sea or, where circumstances so re-
quire, in to a water tight tank reserved for that pur-
pose. If waste is stored and processed on board with a
view to cleaning, separate areas must be allocated for
that purpose;
1.7 Sufficient supply of potable water or pressuriz-
ed clean sea water shall be provided. The sea wa'er
intake must be situated in a position where it is not
potable for the water being taken into be affected by
discharge in to the sea of waste water, was'e and en-
gine coolent outlets y
1-8 A suiable number of changing rooms, wash
basins and toilets, the latter not opening directly on,
to areas wthcre fishery products are prepared, proces-
ed or stored. The wash basins must be equipped with
2055 GI/95—5
3-1 THE GAZETTE OF INDIA : EXTRAORDINARY [i\\Rr II—SEC 3(iij]
appliances for washing and drying the hands that
comply with hygiene requirements," the wash-basin
tap must not be hand-opcrabb.
2. Areas used for the preparation and processing or
freezinglquiek-frjczing of fishery products must have;
2.1 A non-slip floor that is also easy to clean and
disinfect aid equipped for easy drainage of water,
Structures and fixtures must have limber holds that
are large enough not to be obstructed by fish waste
and to allow water to drain freely;
2.2 Walls and ceilings that are easy to clean, partj-
.ilarly where there are pipes, chains or electricity
co.iduits;
2.3 The hydraulic circuits must be arranged or pro-
tected in such a way as to ensure that it is not possible
lor any leakage of oil to contaminate fishery pro-
ducts .
2.4 Adequate ventilation and, where necessary, pro-
per vapour extraction;
2.5 Adequate lighting;
2.6 Appliances for clean;ng and disinfectinc tools,
equipment and fittings;
2.7 Appliances for cleaning and disinfecting the
hands with taps that are not hand-operable and with
single use towels.
3. Equipments and tools such as tables, cutting
benches, containers, conveyors, gutting or filleting ma-
chines, etc. must be resistant to sea water corrosion,
easy to clean and disinfect and well maintained.
4. Factory vessels which freeze fishery products
must have;
4.1 A refrigeration plant sufficiently powerful to
lower the temperature rapidly so as to achieve a core
temperature that complies with the specifications of
this notification;
4.2 Refrigeration plants sufficiently powerful to
keep fishery products in the storage holds at a tempe-
rature that complies with the specifications of this
notification. The storage holds must be equipped with
nil automatic temperature receding system placed so
lhat il can easily be read.
l\. Conditions of hygiene relating to o.i board handling
and storage of fishery products.
1. A qualified person on board the factory vcsel
must be responsible for applying good fishery pmducts
manufacturing practices. That person shall have the
authority to ensure that the provisions of this notifica-
tion are applied and shall make available to inspectors
the programme for inspecting and checking critical
points as applied on board, a register containing that
persons'* comments and the temperature recordings
that may be required.
2. The general conditions of hygiene applicable to
a-eas and equipments shall be those laid down in
ANNEXURE-III, Scction-II.
3. The general conditions of hygiene applicable to
staff shall be those, laid down in Annexure-lll. Scction-
tl(2).
4. Heading, gut rug and filiciinc; niusl be carried
out under the conditions of hygiene laid down in
Annexurc-lV, Section 1(2), (3) a.ul (4).
5. On-board processing of fishery products must be
carried out under the conditions of hygiene laid down
i.i Annexure-TV. Section-Ill, IV & V.
6. Fishery products must be \v;app:d and packed
under the conditions of hygiene laid down in Anncxure
VI.
7. On-board storage of fishery products must be
be carried out u.ider the condiiions of hvg5eiif laid
down in Annexurc-VIIT Para (1) and (2),
ANNEXURE—II
REQUIREMENTS DURING AND AFTER
LANDING
1. Unloading and landing equipment must be cons-
tructed of material which is easy to clean and disin-
fect, and must be kept in a good state of repair and
cleanliness.
2. During unloading and landing, contamination of
fishery produc's must be avoided. It must in parti-
cular be ensured lhat :
2.1 Unloading and landing operations proceed
rapidly ;
2.2 fishery products are placed without unnecessary
delay in a protected environment a* the .emperaturc
required on the basis of the nature of the product and,
where necessary, in ice, in transport, storage or in an
establishment;
2.3 equipment and handling practices that cause
unnecessary damage to the edible pars of the fishery
products are not authorized.
3. Parts of aucMon or wholesale markets where
fishery products are displayed for sale must;
3.1 be covered, and have walls which are easy to
clean;
3.2 have waterproof flooring which is easy to wash
and disinfect, and laid in such a way as to facilitate
the drainage of wa'.er and have a hygienic waste water
disposal system;
3.3 be equipped with sani'ary facilities with an
appropriate number of wash basins and flush lavato-
iics. Wash basins shall be supplied with materials
for cleaning the hands and single use handtowcls;
3.4 be well lit to facilitate the inspeclion of fishery
products;
3.5 when they are used for display or storage of
fishery products, not be used for other purposes, vehi-
cles amitting exhaust' fames which may impair the
quality of the fishery products must not be admitted
to markets, undesirable an:ma1s must not be admit-
ted ;
~i.fi be cleaned regularly and at least after each
sale, crates must after each sale, be cleaned and rins-
ed inside and outside with potable water or clean sca-
watcr; where required, they must be disinfected; .
35
3.7 have displayed in a prominent position signs:
prohibiting smoking, spitting, ea ing and drinking;
3.8 have facilities to provide adequate water sup-
plies; ,
3.9 have special watertight receptacles made of
corrosion resistant materials for fishery products
which are unfit for human consumplicn ; /
4, After landing or, where appropria'e, after first
sale, fishery products must be transported without de-
lay at temperature of melting ict. „
5. The; general conditions of hygiene laid down in
Anncxnre-lll, Section-II, with the exception of point
2.1.1 shall apply muta'is mutandis to the markets in|
which fishery products are displayed for sale or stored.
6, The wholesale markets in which fishery products
arc displayed for sale or stored shall be subject to the
same cond'i ions as those laid down in points 3 & 5 of
this Annexu're and to those set out in pom's 2, 11, 12,
of Si'ction-I of Annexure-Ill.
7. The general conditions of hygiene laid down in .
Annexure-111, Scction-11 shall apply mu'atis mutandis
to wholesale markets.
ANNEXURE III
I. GENERAL CONDITIONS RELATING TO*
PREMISES, BUILDING AND EQUIPMENTS
I1. Premises and building
1.1 The immediate approaches of the processing |
areas shall bo concreted or tarred or turfed to prevent
wind blown dust.
1.2 The processing establishment shall be housed
in a building of permanent nature; affording sufficieri'
protection from normal climatic hazards like wind
blown dust and rain and shall be of sufficient size for
work to be carried out under adequate hygienic condi-
tions. Their design and layout shall be such as to
preclude contamination of the product. Clean and
contaminated parts of the building shall be properly
separate.
1.3 The food handling areas shall be comple ely
separated from the area used for residentii.il purpose.
1.4 The layout of different sections shall be in such
a way as to facilitate the smoo'h and orderly flow of
work to prevent possible cross contamination.
1.5 There should be adequate natural or artificial
lighting. The bulbs and tubes should have protective
covering.
1.6 There shall be adequate facilitate for na'urai
or mechanical ventilation system to provide fresh air
and where necessary good steam and water vapour ex-
traction facilities shall be provided. Ventilation
opening shall be provided with fly proofing arrange-
men's.
2. Fly-proofing, vermin and animal control
2.1 The processing areas including the raw mate-
rial receiving and storing area shall be provided wi'h
effective fly-proofing akrangements. Suitable steps
shall also be raken to prevent the entry of insects,
rodents, birds and animals in'o the processing area.
3. Receiving area
3.1 There shall be a raised platform to unload the
raw material before being taken to (he raw material
receiviug area. The sides and top of this platform
shall be sufficiently protected from ex'raneous con-
tamination.
3.2 The area in which the raw material is received
mid s'orcd shall be so separated from the area in
which the finished product is prepared or packed
as to eliminate contamination.
4. Ceiling, wall and floor of work rooms.
4.1 The floor of the food handling area shall be
wa'er proof, easy to clean and disinfect and laid down
in such a way as to facilitate the drainage of the water
easily or provided with equipment to remove water.
There shall be no water stagnation on the floor.
4.2 The internal walls of the food handling area
shall be durable and have smooth surface which are
easy to clean, and impermeable waterproof and light
coloured.
4.3 Walls shall bo free from projection and all pipes
and cables shall be neatly covered.
4.4 Wall to wall and wall to floor junctions shall be
rounded off to facilitate proper cleaning.
4.5 Ceiling shall be free from cracks and open join**
and shall be smooth, waterproof, light coloured
and easy to clean.
4.6 All doors and windows shall be durable and
made of corrosion resistant material and shall be of
self closing type and easy to clean wi h fly proofing
arrangements.
4.7 All window sills shall be sloping inwards.
4.8 All entry poin's into the processing area shall
be provided with feet washing pit of sui able size. The
pit shall be provided with potable waier and disin-
tcctant. The s'agnant: water shall be changed at
frequent intervals.
4.9 All entry points into the processing area shall
be, provided with adequate facilities for cleaning and
disinfecting hands.
4.10 Instruments and working equipments such as
tables, containers, conveyor belts, knives and other
utensils used shall be of smooth corrosion resistant
materials, easy, to clean and d:sinfecL.
4.11 Utensils used for inedible or contaminated
materials shall be identified by specific mark or colour
or shape and shall not be used for handling edible
producs. Adequa'o waste receptacles shall be pro-
vided for frequent removal of waste from the working
areas.
4.12 Ice crusher or flaFe ice machine shall bs
provided.
3 6 THE GAZETTE OF INDIA : EXTRAORDINARY LPAUT II—SEC. 3tii)J
5. Machinery
5.1 Freezing equipments sufficiently powerful to
achieve a rapid reduction in the temperature so that
the required core temperature is obtained within the
minimum period shall be provided.
5.2 The freeing equipment shall be fitted with
guages to indicate temperature and pressure.
6. Cold rooms | Storage
6.1 Chill room and ice store shall be provided
wherever necessary.
6.2 The cold rooms wher the finished products ar«
stored shall have sufficiency powerful refrigeration
plant to keep products at temperature prescribed.
6.3 The floor of the cold rooms shall be wa'e'r proof,
easy to clean and disinfect and laid-down in such a
manner as to facilitate the drainage of water or shall
be provided with equipment to remove water.
6.4 Walls shall have Vraoo'h surface and shall be
durable, impermeable and easy to clean.
6.5 Ceiling or proof linings shall be easy to clean.
6.6 Doors shall be of durable material and easy to
clean. /
6.7 There shall be adequate lighting.
6.8 The ideal temperature of the cold s'oragt shall
be minus 18° Celsius or below.
6.9 The cold storage shall be fitted with automatic
temperature recording device.
6.10 The cold storage shall have suitable arrange-
ment on the floor and walls to facilitate free circula-
tion of arr.
6.11 An ante-room of suitable size shall be pro-
vided.
6.12 There shall be an efficient alarm system.
6.13 Air curtains shall be provided at the entrance
of the ante-room and cold sforage.
6.14 The cold storage shall be maintained in good
hygienic conditions.
7. Facilities for adequate supplies of potable
water or alternatively, clean sea-water or sea-water
treated by an appropriate system, under pressure and
w sufficient quantity shall be provided. However,
by way of exception, a supply of non-drinking water
is permissible for the production of steam, fire-fight-
ing and the cooling of refrigeration equipment, pro-
vided that the pipes installed for the purpose prc-
cJuue the use of such water for other purpose and
present no risk of contamination of the products.
Non-drinking water pipes shall be clearly distinguish-
ed frcm those used for drinking water or clean sea-
water.
8. Arrangements for hygienic waste water dispo-
sal shall be provided.
9. Facilities to provide sufficient quantities of good
quality ice manufactured from potable water in
crushed form or flake/chunk ice.
10. An adequate number of changing-rooms wilh
smooth, wi-iler-proof, washable walls and floors, wash
basins. Hush lavatories and lockable cupboards shall
be provided. The lavatories shall not open directly
on to the work rooms. The wash basin must have
materials for cleaning the hands and disposable
towejs, ihe wash basin taps must not be hand-opera-
ble.
11. 1/ the volume of products treated requires re-
gular or permanent presence an adequately equipped
lockable room for the exclusive use of the inspection
service shall be provided.
12. There shall be adequate facilities for cleaning
and disinfecting means of transport.
13. Establishments keeping live animals such as
Crustaceans and fish must have appropriate fittings
ensuring the best survival conditions provided with
water of a quality such that no harmful organisms or
substances are transferred to the aninuls.
II. General conditions of hygiene.
1. General conditions of hygiene applicable to pre-
mises and equipment :
1.1 Floors, walls and partitions, ceilings or roof
linings, equipment and instruments used for work-
ing uii fishery products must be kept in a satisfactory
state of cleanliness and repair, so that they do not
ci'i'Stitutc a source of contamination for the pro-
duels.
1.2 Rodents, insects and any other vermin must
be ,\ystcmalically exterminated in the premises or
on the equipments, Rodenticides, insecticides, dis-
infectents and any other potentially toxic substances
must be stored in permises or cupboards which can
be locked ; their use must not present any risk of
conamination oi the product.
1.3 Working arris, instruments and working
cqirpmcnt must be used only for work on fishery
pioducts. However, on authorisation by the com-
pel- iit authority the} may be used for work on other
joixistuff.fi also.
1.4 i'olablc water or clean sea-water must be
used lor all purposes. However, by way of an ex-
^cp;.\;";. uon-poUiblc water may be used for steam
production, fire-fighting and the cooling of refrige-
i-at';'ii equipment, provided that the pipes installed
Jor the purpose preclude the use of such water for
other purposes and present no risk of contamination
of the products.
1.5 Dftergcn";, disinfectants and similar substan-
ces must be approved by the competent authority
and used in such a way that they do not have adverse
effects on the machinery, equipment and products.
2. General conditions of hygiene applicable to
.itaff :
2.1 The highest possible standard cf cleanliness
is required of staff. More specifically :
2.1.1 Staff must wear suitable clean working
clothes and headgear which completely encloses the
hair. This applies particularly to persons handling
exposed fishery products ;
•J-
2.1.2 Stall assigned to the handling and prepara-
tion nf fishery products must be required to wash
their hand at least each lime to work is resumed,
wounds «n the hands, musi be covered by a water
procf dressing ;
2.1.3 Smoking, spitting, eating and drinking in
•work ;md storage premises of fishery products must
be prohibited.
2,2 The employer shalj take all the requisite
measures to prevent persons liable to contaminate
Jiishery products from working on and handling
t'icm, until there is evidence that such persons can
do so without risk.
W'icn recruited, any person working on and hand-
ling fishery products shall be required to prove, by
a medical certificate, that there is no impediment to
such employment. The medical supervision of such
a person shall be governed by toe national legislation
in force.
ANNEXURE—IV
FISHERY PRODUCTS ON SHORE
I. Conditions for fresh products :
1. Where chilled, unpackaged products are not
despa'ched, prepared or processed immediately after
reaching the establishment they must be stored under
ice in the establishment's cold room. Re-icing
must be carried out as often as is necessary; the ice
used, wirh oi without sail, must be made from po-
table water or clean sea-water and be stored under
hygienic conditions in receptacles provided for the
purpose; such receptacles must be kept clean and in
good slate of repair. Prepacked fresh products must
be chiUed with ice or mechanical refrigeration plant
creating similar temperature conditions.
2. If they arc not carried out on board, operations
such .;s heading and gutting must be caried out
hygienically. The products must be washed throughly
with polable water or clean seawater immediately
after such operations.
3. Operations such as filleting and slicing must
be carried out in such a way as to avoid the con-
tamination or apoihtge of fillets and slices, and in
a plnee other than that used for heading and gutting
operations. Fillets and slices must not remain on
work tables any longer than is necessary for their
preparation. Fillets and slices to be sold fresh must
Lv chilled as quickly as possible after preparation.
4. U7J(S and parts that may constitute a danger
to public health must be separated from and removed
from the vicinity of products intended for human
consumption.
5. Containers used for the despatch or storage of
fresh fishery products must be designed in such c
way as to ensure both their protection from con-
tamination and their prcscrvaion under hygienic con-
dJiicus and more particularly they must provide ade-
quate drainage of melt water.
6. Unless special facilities are provided for the
continuous disposal of waste, the latter must be
placed in leakproof, covered containers which ore
easy to clsan and disinfect.
Waste must not be allowed to accumulate in
working areas. It must be removed either continuous-
ly cr a> soon as the containers are full. At the end
of i-uJh working day, the waste Containers shalL b<?
shifted to premises intended for storage of such con-
tainer. The containers, receptacles andlor premises
set aside for waste must always be thoroughly cleaned
and, if appropriate, disinfected after use. Waste stored
there niusi, not tonstilute a source of contamination
for the establishment or of pollution of its surroun-
dings.
11. Conditions for frozen products :
1. Plants must have ;
1.1 Freezing equpiment sufficiently powerful to
achieve a rapid reduction in the temperature so that
the lempcraurts laid down in this notification cap tw
obtained in the product;
1.2 iicezing equipment sufficiently powerful to
keep products in storage rooms at a temperature not
exceeding those laid down in this notification, what'
i-ver tne ambient temperaure may be.
However, for technical reasons) related to the
jnctJird of freezing and to the handling off such
products, for whole fish frozen in brine a .id intended
lor canning, higher temperatures than those laid
down in ihis notification are acceptable although
they may not exceed—9°C.
2. J lesh products to be frozen or quick frozen
muft comply With the requirements of Scction-I of
of this Annexure.
3. Storage rooms must have a temperature re-
cording device in a place where it can easily be read.
The temperature sensor of the recorder must be
located in the area furthest away from the cold
soiiixc. i.e. where the temperature in the storage
I'oonj is the highest. Temperature charts must be
available for inspection by the supervisory authorities
utiewt during the period in which the products are
sioati.
(i'L Conditions for thawing products :
FstabJishnients that carry out thawing operations
must comply with the following requirements :
( I ) fishery products must be thawed under
hygienic conditions; their contamination
must be avoided and there must be ade-
quate drainage for any melt water pro-
duced;
During thawing, the temperature of the
products must not increase excessively;
1,2) after thawing, fishery products must be
bandied in accordance with the require-
ments of this notification, when they are
prepared of procesed, these operations must
be carried out without delay.
IV. CcndiLions for processed products :
J. Fresh, frozen and thawed products used for
preceding must comply with the requirements of
Sedicns-l or II of this Annexure;
1. Where the processing treatment is carried out to
yih'bi! £h>; development of pathogenic micro-
38 THE GAZETTE OF INDIA .:. EXTRAORDINARY [PART 11—SEC. 3(ii)]
orgai:isms, or if it is a significant factor in the pre-
servation of the product, the treatment must be
sc;enificaliy recognised by the law in force and! or
uppiovcd by the competent authority;
The person, responsible for an establishment
urns' keep a register of the processing carried out.
Depending on the type of process employed heating
time and temperature, salt content, PH. water con-
tent, etc. niust be monitored and controlled. Records
must be kept atleast for the expected storage life of
the products and be available to the competent
authority.
3. For products which are preserved for a limited
period by a treatment such as salting, smoking,
drying or marinating the appropriate conditions for
storage must be clearly marked on the packaging.
4. Caning :
In the case of fishery products which have been
subjected to sterilization in hermetically sealed con-
tainers;
4.1 The water used for the preparations of cans
must be potable water;
4 2. The process used for the heat treatment must
be appioptiatc, having regard to such major criteria
as. the heating time, temperature, filling, size of con-
tainers, etc.. a record of which must be kept; the
heat tieaimenf must be capable of destroying or in-
acav&iing pa'hogenic organisms and the spores of
pathogen c micro-organisms. The heating equipment
must be fitted with devides for verifying whether
the containers have in fact undergone appropriate
heat treament. Potable water must be used to cool
con'ainers after heat treatment, without prejudice to
the presence of any chemical additives used in ac-
cordance wiih good technological practice to pre-
ven* corrosion of the equipment and containers ;
4.3. Further checks must be carried out at
random by the manufacturer to ensure that the pro-
cessed products have undergone appropriate heat
trea'inent. viz. I r.Sj
—- incubation tests, incubation mast be carried
out at 37 ± 1°C for seven days or at
• 35 i 1CC for ten days;
— microbiological examination of contents and
containers in the establishment's laboratory
or in another approved laboratory.
4.4 Samples must be taken of production each
days at predetermined intervals, to ensure the effi-
e'ency of sealing. For that purpose appropriate
equipmen': must be available for the examination of
crc's sections of the can—seams.
4.5 Checks are carried out in order to ensure that
con'linef: are not damaged ;
4.6 All containers which have undergone heat
treatment under practically identical conditions must
be given a batch identification mark.
5. Smoking.
Smoking mu?.t be carried out in separate, premises
or a special place equipped, if necessary, with a
ventilation system to prevent the smoke and heat
from the combustion from affecting other premises
or places where fishery products are prepared, pro-
cessed or stored.
5.1 Materials used to produce smoke for the
smoking of fish must be stored away from the place
of smoking .and must be used in "such a way that
they do not contaminate the products.
5.2 Malerials used to produce smoke by burning
wood that has been painted, varnished, glued or has
undergone any chemical preservation treatment must
be prohibited.
5.3 After smoking, products must be cooled rapi-
dly to the temperature required for their preserva-
tion before being packaged.
6. Salting.
6.1 Salting operations must take place in diffe-
rent premises and sufficiently removed from the
premises where the other operations are carried
out.
6.2 Salt used in the treatment of fishery products
must be clean and stored in such a way as to pro-
elude contamination. It must not be re-used
6.3 Any container used for salting or brining
must be constructed in such a way as to preclude
contamination during the salting or bringing pro-
cess.
6.4 Containers or areas used for salting or brin-
ing must be cleaned before use.
?. Cooked crustaceans and molluscan shellfish
products.-—Crustaceans and molluscan shellfish must
be cocked as follows :
7.1 iiuy cooking must be followed by rapid cool-
ing, water used for this purpose mus be po able
water or clean sea-water. If no other method of
preservation is used, cooling must continue until the
temperature approaching that of melting ice is
leached.
7.2 shelling or shucking must be carried out under
hyg\en:c conditions avoiding the contamination of the
product. Where such operations are done by hand,
workers must pay particular attention to the wash-
ing cf their hands and all working surfaces must be
cleaned thoroughly. If machines are used, they must
be cleaned at frequent intervals and disinfected after
each working day. After shelling or shucking,
cooked products must immediately be.frozen or/kept
chilled at s temperature which will preclude the
growth of pathogens, and be stored in appropriate
premises :
7.3 every manufacturer must carry out micro-
b'oiogical checks on his production at regular inter-
val;,, complying with the standards.
8. Mechanically recovered fish flesh.
The mechanical recovery of fish flesh must be
carried cut under the following conditions :
8.1 mechanical recovery of gutted fish must take
place without undue delay after fille'ing, using raw
39
materials tree of guts. Where whole lish are used,
they must be gutted and washed beforehand ;
8.2 the macirnery must be cleaned at frequent
r>i(ev>:;ijs and at least every two hours ';
H.3 after recovery, machinically recovered flesh
must be frozen as quickly as possible or incorporated
in a picduct intended for freezing or establishing
treatment.
V. C'cndtions concerning parasites.
!. During production and before they are released
for human consumption, fish and fishery products
inus! be subject to a visual inspection for the pur-
pose of detecting and removing anv parasites that
are visible. Fish or parts of fish which are obvious-
ly infested with parasites, and which are removed,
must not be packed for human consumption.
2. The fish and fishery products referred to >n
point 3 which arc to be consumed as they are, must,
in addition, be subjected to freezing at a tempera-
ture of not more than —20"C in all parts of the
product for not les than 24 hours. Products sub-
jected to this freezing process must be either raw or
finished.
3. Fish and fishery products subject to the condi-
tions in point 2 ;
3.1 fish to be consumed raw or almost raw, e. g.
r:iw herrng 'Maatje' ;
3.2 the following species, if they are to undergo
a cold smoking process at which the internal tempe-
rature of the fish is less than 60°C.
— mackerel.
— sprat.
3.3 marinated and/or salted herring where this
process is insufficient to destroy the larvae of nema-
todes.
Criteria shall be laid down which must enable
the process which are deemed sufficient or insuffi-
cient to destroy nomatodes to be defined.
4. Manufacturers must ensure that fish and fish
products listed in point 3 or the raw materials for
use in their manufacture are subjected to the treat-
ment dercribed in point 2, prior to their release tor
consumption.
ANNEXURE—V
HEALTH CONTROL AND MONITORING OF
PRODUCTION CONDITIONS
I. Genera! Monitoring :
The competent authority shall make adequate
arrangements for checking and monitoring in order
to establish that the requirements laid down in these
roles are complied with.
Such arrangements shall include in particular :—
(1) a suitable check on the fishing vessels,
on the under standing that such checks
may be carried out during the stay of the
vessel in port;
(2) c suitable cheek on the conditions of
landing and first sale;
(3) suitable checks on harvesting, transport,
relaying and purification areas of bivalve
T.olluscs of pre-processing and proces-
si/g centres.
(4) an inspection at regular intervals of estab-
lishment to check ha particular;
(a) .whether .pre-processed material has been
processed from pre-processing premises
having an adequate hygiene conditions.
(b whether the conditions for approval are
still fulfilled;
.(c), whether the fresh, frozen and processed
fish and fishery products are handled
correctly:
(d) whether the cleanliness of the prenr'ses
facilities and instruments and staff
hygiene are maintained.
(e) whether identification marks are put on
correctly.
(5) A check on storage and transport condi-
tions.
II. Special Checks :
1. Organoleptic checks :•
The competent authority shall carry out inspection
at the time of landing or before first sale
and also during subsequent stages of processing,
storage and transport to check, whether the products
are fit for human consumption. The inspection com-
prises orgar.oleptic checks carried out by sampling.
1.1 If the Organoleptic examination reveals that
the fishery products are not fi: for human consump-
tion, measures shall be taken to withdraw them from
sale and to dispose them off in such way that the
rejected material is not used for export.
1.2 If the organolaptic examination reveals any
dout as to the freshness of the fishery products, use
may be nutue of chemical checks or microbiological
analysis. . • •
2. Parasru, checks :
Before they are released for human consumption,
fisn ana nsnery products must be subjected to a
visual inspection by way of sample, for the purpose
of detecting any parasites that are visible. Fish or
parts of fisn which are obviously infested with para-
sites, and which are removed shall be disposed of
in such a way that such material is not used for
export.
3. Histamine check :
Wherever necessary samples shall be drawn and
tested for Histamine conten*.
Nine samples must be taken from each batch.
this must fulfil the following requirements :
— the mean value must not exceed 100 ppm;
40 THE GAZETTE OF' J \DIA : EXTRAORDINARY [PART II—SHC. 3(iii]
— two samples may have a value of more1 than
100 ppm; but less than 200 pprn;
-~ no samples may have a value exceeding
200 ppin.
these limits apply only to Jish speojes of the
following families ; Scombridge and ClupeJdae. How-
owr, fish belonging to these families which have
undergone onzymt ripening treatment in brine may
na\e higher histaminc levels but not more than
twice the above value. Examinations must be carried
out in accordance with reliable, scientifically r;-
ccanised methods, such as high-performance liquid
ch rcmatogt aphy (HPLC).
4. Contaminants present in the aquatic environ-
ments :
Without prejudice to the rules concerning water
protection and management and in particular thnse
concerning pollution of the aquatic environment, ;he
11811617 products must not contain in their edible
parts contaminants present in the aquatic environment
such us heavy metals and organochlorinatcd sub-
st.inces ut such a level that the calculated distaiy
intake exceeds the acceptable daily or weekly in-
take for humans.
A monitoring system must be established by the
competent uuthority to check the level of contamina-
tion of fishery products.
5. Microbiological analysis :
Wherever necessary, samples shall be drawn and
tested for microbiological factors.
Sampling plans, methods of analysis and accep-
tance criteria for this purpose shall be :
(a) As per the requirements of importing coun-
tries
or
(b) As par the microbiological Manual issued
hy Export Inspection Council.
ANNEXURE—VI
PACKAGING
1. Packaging must be carried out under satisfac-
tory conditions of hygiene, to preclude contamination
of Ihe fishery produces.
2. Packaging materials and products liable to enter
into contact with fishery produces must comply with
all the uilcs of hygiene and in particular :
- - they must not be such as to impair the
orgaDoleptic characteristic of the fishery
products;
— they must not be capable of transmitting
to the fishery products substances harmful
it) human health;
— they must be strong enough to protect the
fishery products adequately.
3. Containers used for transport of raw material
to the processing plant shall not be used to store the
accepted raw materials and also in subsequent pro-
cessing such containers shall be identifiable by suita-
ble colour or marks.
4. Wnh ihe exception of certain containers mode
<\l impervious, smooth and corrosion resistant mate-
rial whxh arc easy to clean and disinfact, which
may be re-used after cleaning and disinfacting, packa-
ging materials my not be r,e-used. Packaging mate-
vials used for fresh products held under ice must
provide adequate drainage for melt water.
5. fJnused packaging materials must be stored in
premises awny from the production area and be
pwected from dust and contamination.
ANNEXURR—VII
t. Identification mark :
1.1. The packages of Fresh, Frozen & Processed
Fish jjiid Hshcry Products and accompanying docu-
ments shall bear the numerical processor Code
(approval number) allotted by the competent ajtho-
rity followed by an abbreviation or full description of
<hf name and type of the product year, month &
date of production. An illustration is given below :
520 FSPO
4 A 10
- - 520 the numerical code allotted by the
competent authority to the processor;
— FS : name of the product (Frozen Shrimp)
— P D : type of the product (Pooled &
Dcvsined)
— 4 : year of processing (the last digit of
1994)
— A : the month processing (First month
i.e. January)
— 10 : data of processing (10th day of the
month)
1.2. The following abbreviations shall be used
for the Tn<\th of the year —
January
February
March
April
May
June
July
August
September
October
November
December
— A
— B
— C
— D
— E
— F
— G
— H
— J
— K
L
— M
ANNEXURE—VIII
STORAGE AND TRANSPORT
1. Fresh, Frozen and Processed Fish and Fi/hery
Products must, during storage and transport, be kept
at the temperature laid down in this notification and
in particular :—
•— Fresh or thawed fishery products and
cooked and chilled crustanccan and molus-
can shellfish products must be kept at the
tempreture of melting ice;
41
—- Frozen Fisheries Products with the excep-
tion of frozen fish in brine infended lor
the manufacture of Canned Foods, must
be kept at an even temperature of — 1 8 C
cr less in a]] parts of the product, allowing
for the possibility of brief, upward fluc-
tuations of not mote than 5"<"', during
transport;
— processed products must be kept at the
temperature specified by the manufacturer,
when the cnxurnstances so require.
2. Where frozen fishery products are transported
from a cold storage (plant to an approved establish-
ment to be thawed arrival for the purposes of pre-
paration andjor processing and where the distance
to be covered is short, not exceeding 50 km., or
1 hour journey, the competent authority may grant
a derogation from the conditions laid rlowrj in point 1,
second para.
3. Products may not be stored or transported with
other products which may contaminate them or affect
their hygien, unless they are packaged in such a
way as IQ provide satisfactory protection,
4. Vehicles used for the transport of fishery pro-
ducts must be constructed and equipped in such
a way that the temperature laid down in this notifi-
cation can be maintained through out the period of
tiunfcpoit. If ice is used to chill the products, ade-
quate drainage must be provided in order to ensure
that water from melted ice does not stay in contact
with the products. The inside surfaces of the means
of transport must be finished in such a way that
they do not adversely affect the fresh, frozen and
processed fish and fishery products. They must be
smooth and easy to clean and disinfect
5. Means of transport used for fresh, frozen and
processed fish and fishery products may not be used
for transporting other products likely to impair or
contaminate fishery products, except when fishery
products can be guaranteed uncoutarninated as a
result of such transport being thoroughly cleaned and
disinfected.
6. Fresh, frozen and processed fish and fishery
products may not be transported in a vehicle or
container which is not clean or which should have
b'*en disinfected.
7. The transport conditions of Fresh, Frozen and
Processed Fish and Fishery Products to be exported
shall be such that they do not adversely affect the
products.
ANNEXURE—IX
In accordance with Clause 9 of the Notifica-
tion- guidelines must be laid down for application
of principles on which own checks are to be
based. It is also necessary to define what is meant
by identification of critical points and the estab-
lishment and implementation of methods|moni-
toring such critical points. It has also been pres-
cribed that laboratories must be approved by the
competent authority and written records must be
maintained containing all information relating
to the establishment of own checks and the re-
sults of these checks. Even though, the design
and introduction of own checks will differ from
one establishment to another, it is necessary to
issue some guidelines to facilitate the uniform
application of Clause No. 9 of this notification.
1. "Own checks" means all those actions aimed
at ensuring and demonstrating that fresh Frozen
and processed fishery products satisfy the require-
ments of the Notification. These actions must
correspond to an approach internal to the estab-
lishment and they must be developed and imple-
mented by the persons responsible for each unit.
1.1 As part of internal approach the establish-
ment may use guides of Good Manufacturing
Practices drawn up by appropriate professional
organisation and acceptable tcr the competent
authority.
1.2 The persons responsible for the establish-
ment must ensure that all staff concerned for
"own checks" receive adequate training in order
to effectively participate in the implementation
process.
2. "Critical Point" means any point, step or
procedure at which control can be applied and a
food safety hazard can be prevented, eliminated
or reduced to acceptable levels. AH critical ,
points which are useful for ensuring compliance
with the hygiene requirements of this Notification
must be identified. For the purpose of identify-
ing these critical points, Appendix-I of this An-
nexure shall apply.
2.1 The critical points are specific to each
establishment depending on the raw materials,
its-uses and on its manufacturing process, struc-
trues and equipments, end products and monitor-
ing system.
3. "Monitoring and checking such critical points"
includes all those of observations | and | or measure-
ments necessary to ensure that critical points are
kept under control. Monitoring and checking cri-
tical control noint does not include veryfying
that end products conform with the standards
laid down in this notification. For the purpose of
introducing and implementing monitoring and
checking Appendix-II of this Annexure shall
apply.
4. Sampling for laboratory analysis referred to
Clause 9.3 of this Notification is intended to
confirm that the own checks system complies
effectively with Clause 1, 2 and 3 above.
4.1. The persons responsible for the establish-
ment must make provision for a sampling pro-
gramme which though not concerning systemati-
2055 GII95-6.
42 THE GAZETTE OF INDTA : FXTRAORDINARY [PAHI JI—SEC. 3(iO]
tally every production batch|code, nevertheless
allows:
(a) Validation of the own check system when
first set up:
(b) It necessary, invalidation of the system
in case of change to the characteristics
of the product or to the manufacturing
process;
(c) Veriiication at specific intervals that all
provisions Lire still appropriate and pro-
perly complied with.
4.2 Own checks system shall be confirmed in
accordance with the provisions set out in Appen-
dix- I l l of this Annexure.
5. For the approval of laboratories mentioned
in Clause 4.3 of this Notification, the competent
authority shall take into account the requirements
of CN 45001!ISO auidc 25JNABL Criteria stand-
ards or the equipvalent requirements. However,
for the approval of establishments internal labo-
ratories the competent authority may base on
less restrictive principles.
6, In order to keep a "Written record" or record
registered in an indelible fashion referred to in
the Clause 9.4 of this Notification, the persons
responsible for the establishment must document
all information relating to the implementation of
own-checks and their verification.
6.1 The documentation referred to at (6) above
must include the following 2 types of information
to be kept for submission to the competent autho-
rity:
(a,) A detailed and comprehensive document
including:
description of the product:
— description of the manufacturing pro-
cess indicating critical points;
— for each critical point, identified hazards
assessment of risks and control mea-
sures;
— Procedures for monitoring and checking
at each such critical point with identi-
fication of critical limits for parameters
that need to be controlled and correc-
tive action to be taken in the case of
loss of control;
procedures for verification and review.
(b) Records of observations and'or measure-
ments referred to at (?) above, the results of veri-
fication referred to in (4) above reports and
written accounts of decisions relating to corrective
action when taken. An appropriate document
management system should be provided for easy
retrieval of all documents relating to an identi-
fied production batch (code.
7, The competent authorities shall ensure ap-
propriate training of inspection staff authorised
to perform official checks to allow them to assess
own-checks system set up by the persons respon-
sible for the establihment on the basis of the
documents submitted.
GENERAL PRINCIPLES
It is recommended that a model of logical ap-
proach be followed, of which the following princi-
ples form the essential components:
— identification of hazards, analysis of
risks and determination of measures
necessary to control them;
— identification of critical paints;
— establishment of critical limtis for each
crtical point;
— establishment of corrective action to be
taken when necessary;
— establishment of monitoring and check-
ing procedures;
•— establishment of verification and review
procedures;
— establishment of documentation con-
cerning all procedures and records;
Such a model, or the principles on which it is
based, should be used with the flexibility appro-
priate to each situation.
APPENDIX 1
IDENTIFICATION O F CRITICAL POINTS
It is recommended to proceed to the following
activities in sequence.
1. Assembly of a multidisciplinary team.—This
team, which involves all parts of the enterprises
concerned with the product, needs to include the
whole range of specific knowledge and expertise
appropriate to the product under consideration,
its production (manufacture, storage, and distri-
bution), its consumption and the associated po-
tential hazards.
Where necessary, the team will be assisted by
specialists who will help it to solve its difficulties
as regards assessment and control of critical
points.
The team may consist of:
— a quality control specialist who under-
stands the biological, chemical or physi-
cal hazards connected with a particular
product group;
43
— a production specialist who has respon-
sibility for, or is closely involved with,
the technical process of manufacturing
the product under study;
— a technician who has a working know-
ledge of the hygiene and operation of
the process plant and equipment;
— any other person with specialist know-
ledge of microbiology, hygiene and
food technology.
One person may fulfil several of these roles,
provided all relevant inofrmation is available to
the team and is used to ensure that the own-
checks system developed is reliable. Where ex-
pertise is not available in the establishment,
advice should be obtained from other sources
(consultancy, guides of good manufacturing prac-
tices, etc).
2. Description of the product.
The end product should be described in terms
of:
— Composition (e.g. raw materials, ingre-
dients, additives, etc.);
— structure and physico-chemical charac-
teristics (e.g. solid, liquid, gas, emulsion.
AW, Ph, etc.);
— Processing (e.g. heating, freezing, dry-
ing, salting, smoking, etc. and to what
extent);
— Packaging (e.g. hermetic, vaccum, modi-
fied atmosphere);
— storage and distribution conditions:
— required shelf life (e.g. sell by date and
best before date);
— instructions for use;
— any microbiological or chemical criteria
applicable.
3. Identification of intended use.—The multi-
disciplinary team should also define the normal
or expected use of the product by the customer
and the consumer target groups for which the
product is intended. In specific cases, the suitabi-
lity of the product for particular groups of consu-
mers, such as institutional caterers, travellers, etc.
and for vulnerable groups of the population may
have to be considered.
4. Construction of a flow diagram (Description
of manufacturing process).—Whatever the for-
mat chosen, all steps involved in the process, in-
cluding delays during or between steps, from re-
ceiving the raw materials to placing the end pro-
duct on the market, through preparation, process-
ing, packaging, storage and distribution, should
be studied in sequence and presented in a detailed
flow diagram with sufficient technical data.
Type of data may include but are not limited
to:
— Plan of working premises and ancillary
premises;
— equipment layout and characteristics;
— sequence of all process steps (including
the incorporation of raw materials, in-
gredients, or additives vnd delays dur-
ing or between steps);
— technical parameters ot, operations (in
particular time and temperature, includ-
ing delays);
— flow of products (including potential
cross-contamination);
— segregation of clain and dirty areas (or
high [low risk areas);
—. cleaning and disinfection procedures;
— hygienic environment of the establish-
ment;
— personnel routes and hygiene prectices;
— product storage and distribution condi-
tions.
5. On-site confirmation of flmv diagram.—After
the flow diagram has been drawn up, the multi-
disciplinary team should confirm it on site during
operating hours. Any observed deviation must
result in an amendment of the original How dia-
gram to make it accurate.
6. Listing of hazards and control measures.—
Using the confirmed flow diagram as a guide, the
team should:
6.1 List all potential biological, chemical ot
physical hazards that may -be reasonably expected
to occur at each process step (including acquisi-
tion and storage of raw materials and ingredients
and delays during manufacture).
A hazard is a potential to cause harm to health
and is anything covered by the hygiene objectives
of this notification. Specifically, it can be any of
the following:
— unacceptable contamination (or recon-
tamination) of a biological (micro orga-
nisms, parasites), chemcial or physical
nature of raw materials, intermediate
products or final products,
— unacceptable survival or multiplication
of pathogenic micro-organisms and un-
acceptable generation of chemcials in
intermediate products, final products,
production line or line environment.
— unacceptable production or persistance
of toxins or other undersirable products
of microbial metabolism.
44 THE GAZETTE OF INDIA : EXTRAORDINARY [PART IT—SEC. 3 (ii)]
For inclusion in the Hst, hazards, must be of
a nature such that their elimination or reduction
to acceptable levels is essential to the production
of safe food.
6.2 Consider and describe what control mea-
sures, if any, exist which can be applied for each
hazard.—Control measures are those actions
and activities that can be used to prevent hazards,
eliminate those or reduce their impact or occur-
rence to acceptable levels.
More than one control measure may be requir-
ed to control an identified hazard and more than
one hazard may be controlled by one control
measure. For instance, pesteurization or controlled
heat treatment may provide sufficient assurance
of reduction of the level of both solmonells and
listens. Control measures need to be supported
by detailed procedures and specifications to en-
sure their effective implementation. For instance,
detailed cleaning schedules precise hecft treatment
« specifications, maximum concentrations of preser-
vatives used in compliance with the applicable
rules on additives of the importing countries.
7. Methods for identification of critical points.-
The identification of a critical point for the con-
trol of a hazard requires a logical approach. Such
an approach can be faciliated by the use of the
following decision tree (other: methods can be
used by the team, according to their knowledge
and experience).
Decision tree for the identification of critical
points.—-Answer each question in sequence, at each
step and for each identified hazard.
For the application of the decision tree, each
process step identified in the flow diagram should
be considered in sequence. At each step, the.
decision tree must be applied to each hazard
that may be reasonably expected to occur or be
introduced and each control measure identified.
Application of the decision tree should be flexi-
ble and requires common sense, having consider.
ation for the whole manufacturing process in
oirder to avoid, whenever possible, unnecessiarv
critical points.
8. Action to be taken following identification
of a critical point.—The identification of critical
points has two consequences for the multidisci-
plinary team which should then:
— Ensure that appropriate control mea-
sures are effectively designed and im-
plemented. In particular, if a hazard
has been identified at a step where con-
trol is necessary for product safety and
no control measure exists at that step,
or at any other, then the product or
proces should be modified at that step,
or at an earlier or later stage, to in-
clude a control measure;
— establish and implement a monitoring
and checking system at each critical
point.
45
APPENDIX-II
ESTABLISHMENT AND IMPLEMENTA-
TION OF MONITORING AND CHECKING
CRITICAL POINTS
An appropriate monitoring and checking sys-
tem is essential to ensure the effective control of
each critical point. To develop such a system, it
is recommended to proceed to the following acti-
vities:—
1. Establishment of critical limits for each
control measure associated with each critical
point.—Each control measure associated with a
critical point should give rise to the specification
of critical limits. These critical limits corres-
pond to the extreme values acceptable
with regard .to product safety. They
separate acceptability from unacceptability. They
are set for observable or measurable parameters
which can readily demonstrate that the critical
point is under control; they should be based on
substantiated evidence that chosen values will
result in process control.
Examples of such parameters include tempe-
rature, time, pH, moisture level, additive, preserv-
ative or salt level, sensory parameters such as
visual appearance or texture, etc.
In some cases, to reduce the risk of exceeding
a critical limit due to process variations, it may
be necessary to specify more stringent levels (i.e.
target levels) to assure that critical limits are
observed.
Critical limits may be derived from a; variety
of sources.
When not taken from regulatory standards
(e.g. frozen storage temperature) or from exist-
ing and validated guides of good manufacturing
practices, the team should ascertain their validity
relative to the control of identified hazard and
critical points.
2. Establishment of a monitoring and checking
system for each critical point.—An essential part
of own-checks is a programme of observations or
measurements performed at each critical point to
ensure compliance with specified critical limits.
•The programme should describe the methods, the
frequency of observations ot measurement and
the recording procedure.
Observations or measurements must be able to
detect loss of control of critical points and pro-
vide information in time for corrective action to
be taken.
Observations or measurements may be made
preferably continuously. When observations or
measurements are not continuous, it is necessary to
establish a frequency of observations or measure-
ments which provides reliable information.
The programme of observations or measure-
ments should properly identify for each critical
point :
— who is to perform monitoring and check-
ing,
— when monitoring and checking is per-
formed,
— how monitoring and checking is per-
formed.
3. Establishment of a corrective action plan
Observations or measurements may indicate :
— that the parameter monitored tends to
deviate from its specified critical limits,
indicating a trend toward loss of control.
Appropriate corrective action to main-
tain control must be taken before the
occurence of hazard.
— that the parameter monitored has deviat-
ed from its specified critical limits indi-
cating a loss of control. It is necessary
to take appropriate corrective action to
regain control. Corrective action has
to be planned in advance by the multi-
disciplinary team, for each critical point,
so that it can be taken without hesitation
when a deviation is observed.
Such corrective action should include :
— proper identification of the person (s)
responsible for the implementation of
the corrective action,
— description of means and action requir-
ed to correct the observed deviation,
— action to be taken with regard to pro-
ducts that have been manufactured dur-
ing the period when the process was out
of control,
— written record of measures taken,
APPENDIX-III
VERIFICATION OF OWN-CHECKS SYSTEM
Own checks system verification is necessary to
ensure that they are working effectively. The
multidisciplinary team should specify the methods
and procedures to be used. Usable method may
include in particular random sampling and ana-
lysis, reinforced analysis or tests at selected critical
points, intensified analysis of intermediate or final
products, surveys on actual condition during
storage, distribution and sale and on actual use of
the product. Verification procedures may include :
inspection of operations, validation of critical
limits, review of deviations, corrective action and
measures taken with regard to the product, audits
of the own-checks system and its records.
46 THE GAZETTE OF INDIA : EXTRAORDINARY [PART U—SEC. 3(ii)]
Verification should provide for confirmation of
the suitability of the own-checks system establish-
ed and ensure, afterwards, with an appropriate
frequency, that the provisions laid down are still
being properly applied.
In addition, it is necessary to revive the sys-
tem, to ensure that it is (or will be) still valid in
case of change. Examples of change include :
— change in raw material or in product,
processing conditions (factory layout
and environment, process equipment,
cleaning and disinfection programme),
— change in packaging, storage or distri-
bution conditions,
— change in consumer use,
— receipt of any information on a new
hazard associated with the product.
Where necessary, such a review must result in
the amendment of the provisions laid down.
Any change to the own-checks system arising
should be fully incorporated into the documenta-
tion and record-keeping system in order to ensure
that accurate up-to-date information is available.
Where criteria are specified in regulations, such
criteria are to be used as reference values for the
verification process.
[F. No. 6|2|94-EI&EP]
A. D1DAR SINGH, Jt. Secy.
NOTIFICATION
New Delhi, the 21st August, 1995
S.O. 731(E).—In exercise of the powers con-
ferred by sub-section (1J of Section 16A of the
Export (Quality Control and Inspection) Act,
1963 (22 of 1963), and in supersession of the
Notification bearing S.O. 929(E) dated 4th Decem-
ber, 1990, the Central Government hereby directs
that the sub-section (d) of Section 6 of the Act
shall not apply from the date of publication of this
notification in the Official Gazette, for export of
commodities notified under section 6 of the Act.
excepting fish and fishery products by industrial
units set up in the Export Processing Zones, Free
Trade Zones and 100 per cent Export Oriented
Units approved by the Central Goverment.
[F. No. 6[22|90-EI&EP1
A. DIDAR SINGH, Jt. Secy.
NOTIFICATION
New Delhi, the 21st August, 1995
S.O. 732(E),—In exercise of powers conferred
by sub-section (1) of section 16A of the Export
(Quality Control and Inspection) Act, 1963 (22 of
1963), the Central Government hereby directs that
the following amendment shall be made in the
Notification of the Government of India in the
Ministry of Commerce, No. S.O. 482(E) dated
the 25th July, 1991, namely:—
In the said Notification, for the words, '"Agri-
culture and Food Products, Fruit Products, Fish
& Fishery, Products, Chemicals & Allied Pro-
ducts", the following words, "Agriculture & Food
Products, Fruit Products, Chemicals & Allied
Products" shall be substituted.
[F. No. 6|5|91-EI&EP|(ii)l
A. DIDAR SINGH, Jt. Secy.
47
NOTIFICATION
New Delhi, the 21st August, 1995
S.O. 733(E).—In exercise of powers conferred
by sub-section (1) of section 16A of the Export
(Quality Control and Inspection) Act, 1963 (22 of
1963), the Central Government hereby directs that
the following amendment shall be made in the
N
All of The Export (Quality Control and Inspection) Act, 1963