G.S.R. 371(E): Environment (Protection) second Amendment Rules, 2002
Rules made under The Environment (Protection) Act, 1986
- Made under: The Environment (Protection) Act, 1986
This text is shown as one document.
Full text
REGD. NO. D. L.-33004/99
The Gazette of India
EXTRAORDINARY
PART II— Section 3—Sub-section (i)
PUBLISHED BY AUTHORITY
No. 230] NEW DELHI, FRIDAY, MAY 17, 2002/VA1SAKHA27,1924
1601 GI 2002
(1)
2 THE GAZETTE OF INDIA: EXTRAORDINARY |?AKT II—SEC. 3(1)1
J
4 T H E G A Z h 1 ' 1 b O F I N D I A • E X T R A O R D I N A R Y [ P A R T I I — S E C . 3 ( i ) ]
5
6 THE GAZETTE OF INDIA ; EXTRAORDINARY | PART U-~SBC. 3(1)1
7
8 THE GAZETTE OF INDIA EXTRAORDINARY |P\m II—Si cl(\)\
NOTIFICATION
New Delhi, the 17lh May. 2002
G.S.R371(E).—In exercise of the powers conferred by sections 6 and 25 of the Environment
(Protection) Act, 1986 (29 of 1986), the Central Government hereby makes the
following rules further to amend the Environment (Protection) Rules, 1986, namely :-
1. (1) These rules may be called the Environment (Protection) second
Amendment Rules, 2002.
(2) They shall come into force on the date of their publication in the
Official Gazette.
2. In the Environment (Protection) Rules, 1986 (hereinafter referred to as the said rules),
in Schedule I, -
(a) against serial number 47, item (d) relating to Diesel generators for
domestic purposes and the entries relating thereto shall be omitted;
(b) serial number 83 relating to standards/Guidelines for control of noise
pollution from Stationary Diesel Generator(DG) sets and the entries
relating thereto shall be omitted;
(c) after serial number 93 relating to Primary Water Quality Criteria for
Bathing Waters and the entries relating thereto, the following serial
numbers and entries shall be inserted, namely :-
9
"94. NOISE LIMIT FOR GENERATOR SETS RUN WITH DIESEL
1. Noise limit for diesel generator sets (upto 1000 KVA) manufactured on or after
the 1" July, 2003.
The maximum permissible sound pressure level for new diesel generator (DG) sets
with rated capacity upto 1000 KVA, manufactured on or after the l" July, 2003 shall
be 75 dB(A) at 1 metre from the enclosure surface.
The diesel generator sets should be provided with integral acoustic enclosure at the
manufacturing stage itself.
The implementation of noise limit for these diesel generator sets shall be regulated as
given in paragraph 3 below.
2. Noise limit for DG sets not covered by paragraph 1.
Noise limits for diesel generator sets not covered by paragraph 1, shall be as
follows >
2.1 Noise from DG set shall be controlled by providing an acoustic enclosure or by
treating the room acoustically, at the users end.
2.2 The acoustic enclosure or acoustic treatment of the room shall be designed for
minimum 25 dB (A) insertion loss or for meeting the ambient noise standards,
whichever is on the higher side (if the actual ambient noise is on the higher side, it
may not be possible to check the performance of the acoustic enclosure/acoustic
treatment. Under such circumstances the performance may be checked for noise
reduction upto actual ambient noise level, preferably, in the night time). The
measurement for Insertion Loss may be done at different points at 0.5 m from the
acoustic enclosure/room, and then averaged.
2.3 The DG set shall be provided with proper exhaust muffler with insertion loss of.
minimum 25 dB(A).
2.4 These limits shall be regulated by the State Pollution Control Boards and the State
Pollution Control Committees.
2.5 Guidelines for the manufacturers/users of Diesel Generator sets shall be as under :-
01 The manufacturer shall offer to the user a standard acoustic enclosure of 25
dB(A) insertion loss and also a suitable exhaust muffler with insertion loss of
25 dB(A).
|6t>l/&7X/fl2- 2
K ) T H E G A Z E T T E O F I N D I A • E X T R A O R D I N A R Y [ P A R T I I — S E C . 3 ( i ) j
02 The user shall make efforts to bring down the noise levels due to the DG set,
outside his premises, within the ambient noise requirements by proper siting
and control measures.
03 Installation of a DG set must be strictly in compliance with the
recommendations of the DG set manufacturer.
04 A proper routine and preventive maintenance procedure for the DG set should
be set and followed in consultation with the DG set manufacturer which would
help prevent noise levels of the DG set from deteriorating with use.
3. LIMITS OF NOISE FOR DG SETS (UPTO1000 KVA) MANUFACTURED ON
OR AFTER THE 1ST JULY, 2003
3.1 'Applicability
01. These rules apply to DG sets upto 1000 KVA rated output, manufactured or imported
in India, on or after l" July, 2003.
02. These rules shall not apply to -
(a) DG sets manufactured or imported for the purpose of exports outside
India; and
(b) DG sets intended for the purpose of sample and not for sale in India.
3.2. Requirement of Certification
Every manufacturer or importer (hereinafter referred to as "supplier") of DG set
(hereinafter referred to as "product") to which tripse regulations apply must have valid
certificates of Type Approval and also valid certificates of Conformity of Production
for each year, for all the product models being manufactured or imported from 1st
July, 2003 with the noise limit specified in paragraph 1.
33 Sale, import or use of DG sets not complying with the rules prohibited
No person shall sell, import or use of a product model, which is not having a valid
Type Approval certificate and Conformity of Production certificate.
3.4 Requirement of Conformance Labelling
(i) The supplier of the 'product' must affix a conformance label on the product meeting
the following requirements :-
(a) The label shall be durable and legible.
(b) The label shall be affixed on a part necessary for normal operation of the
'product' and not normally requiring replacement during the 'product' life.
11
(ii) The conformance label must contain the following information :
(a) Name and address of the supplier (if the address is described in the owner's
manual, it may not be included in the label)
(b) Statement "This product conforms to the Environment (Protection) Rules,
1986".
(c) Noise limit viz. 75 dB(A) at 1 m
(d) Type approval certificate number.
(e) Jate of manufacture of the product.
3.5 Nodal Agency
(i) The Central Pollution Control Board shall be the nodal agency for implementation of
these regulations.
(ii) In case of any dispute or difficulty in implementation of these regulations, the matter
shall be referred to the nodal agency.
(iii) The nodal agency shall constitute a Committee to advise it on all matters; including
the disputed matters, related to the implementation of these regulations.
3.6 Authorised agencies for certification
The following agencies are authorized to carry out such tests as they deem necessary
for giving certificates for Type Approval and Conformity of Production testings of
DG sets and to give such certificates :-
(i) Automotive Research Association of India, Pune
(ii) National Physical Laboratory, New Delhi
(iii) Naval Science & Technology Laboratory, Visakhapatnam
(iv) Fluid Control Research Institute, Palghat
(v) National Aerospace Laboratory, Bangalore
3.7 Compliance and Testing Procedure
The compliance and testing procedure shall be prepared and published by the Central
Pollution Control Board, with the help of the certification agencies.
1601 GI/2002-3
]2 THE GAZETTE OF INDIA: EXTRAORDINARY |PAK r II—SEC. 3(i)1
95. EMISSION LIMITS FOR NEW DIESEL ENGINES (UP TO 800 KW) FOR
GENERATOR SETS (GENSETS) APPLICATIONS
1. EmlMloB Llmiti
The emission limits for new diesel engines up to 800 kw, for gensets
applications shall be as given in the Table below:
TABLE
Capacity of
dUMl tngjMt
Upto 19 kw
>19 kw upto
50 kw
>30 kw Npto
260 kw
> 260 kw
upto 800 kw
Date of
iMploBMtattoa
1.7.2003
1.7.2004
1.7.2003
1.7.2004
1.7.1003
1.7.2004
(g/kw-kr) for
NO,
9.2
9.2
9.2
92
9.2
9.2
HC
1J
l J
U
U
U
l J
CO
5.0
3.5
5.0
3.5
3.5
3.5
PM
0.6
OJ
0.5
0J
0.3
0.3
Saok*
Uni t
(bent
•bMrptkw
cooffkitnt,
n'1) (at rail
load)
0.7
0.7
0.7
0.7
0.7
0.7
Teatcycta
Torqut Weighting
% facton
100 0.05
75 0.25
50 030
25 0J0
10 0.10
2. Applicability
These rules shall apply to all new diesel engines for genset applications
(hereinafter referred to as 'engine') manufactured in India and all diesel
engines for genset applications and diesel gensets (hereinafter referred to as
'product'), imported into India, after the effective date:
Provided that these rules shall not apply to: -
(a) any engine manufactured or engine or product imported for the purpose of export
outside India, or;
(b) any engine or product intended for the purpose of sample only and not for sale in
India.
13
3. Reqairemcat of certification
Every manufacturer of engine or every importer of engine or product must
have valid certificates of Type Approval and certificates of Conformity of
Production for each year, for all engine models being manufactured or for all
engine or product models being imported, after the effective date with the
emission limit as specified in paragraph 1.
4. Sale, Import or use of engine or product not complying with these rules
No person shall sell, import or use of an engine or a product which is not
having a valid Type Approval certificate and Conformity of Production
certificate as per paragraph 3.
5. Requirement of cooformance labelling
(i) All the engines (individually or as part of the product) shall be clearly engraved
'Genset Engine' on the cylinder block,
(ii) The engine or the product must be affixed with a conformance label meeting the
following requirements :-
(a) the label shall be durable and legible;
(b) the label shall be affixed on a part necessary for normal operation of the
engine or the product and not normally requiring replacement during the life
of the engine or the product.
(iii) The conformance label must contain the following information:
(a) name and address of the engine manufacturer or the engine or product
importer (if the address is given in the owner's manual, it may not be included
in the label);
(b) statement that 'this engine or product conforms to the Environment
(Protection) Rules, 1986';
(c) type approval certificate number;
(d) date of manufacture of engine or in case of import, the date of import of the
engine or the product.
6. Compliance with BIS specifications
All engines up to 20 kw (individually or as part of the product) shall carry ISI mark
and meet relevant BIS specifications (IS 10001).
7. Nodal agency
(i) The Central Pollution Control Board shall be the nodal agency for implementation
of these rules,
(ii) In case of any dispute or difficulty in implementation of these rules the matter
shall be referred to the nodal agency,
(iii) The nodal agency shall constitute a Committee to advise it on all matters,
including the disputed matters, related to the implementation of these rules.
14 THE GAZhTl'fc OF INDIA: EXTRAORDINARY [PART II—SEC. 3(i)l
8. Authorised agencies for certification
The following agencies are authorized to carry out such tests as they deem
necessary for giving certificates of Type Approval and Conformity of
Production tests for Diesel engines and to give such certificates :-
(i) Automotive Research Association of India, Pune.
(ii) Vehicle Research and Development Establishment, Ahmednagar.
9. Compliance and testing procedure
The compliance and testing procedure shall be prepared and published by the
Central Pollution Control Board with the help of the Certification Agencies.
10. Fuel Specification
The specification of commercial fuel applicable for dicsel gensets shall be the
same as applicable for commercial HSD(High Speed Diesel) applicable for
diesel vehicles in the area, from time to time."
3. In the said rules, in Schedule VI, in Part E relating to NOISE STANDARDS,
in clause B, the entry "(d) Diesel generator for domestic purposes" shall be omitted.
[F. No. Q-l 5022/2/2001-CPA]
C. VISWANATH. Jt. Secy.
Note:— The principal rules were published in the Gazette of India vide number S.O.844(E)
19th November, 1986 and subsequently amended vide S.O.433(E) dated 18th April, 1987,
S.O.64(E) dated 18th January, 1988, S.O.3(E) dated 3rd January, 1989, S.O.190(E) dated 15*
March, 1989, G.S.R. 913(E) the 24th October, 1989, S.O.12(E) dated the 8th January, 1990,
G.S.R.742(E) dated the 30th August, 1990, S.O.23(E) dated the 16th January, 1991, G.S.R.
93(E) dated the 21" February, 1991, G.S.R. 95(E) dated the 12th February, 1992, G.S.R. 329
(E) dated the 13th March, 1992, G.S.R. 475(E) dated the 5th May, 1992, G.S.R. 797 (E) dated
the 1st October, 1992, G.S.R. 386 (E) dated the 28th April, 1993, G.S.R. 422(E) dated the 19th
May, 1993, G.S.R. 801(E) dated the 31" December, 1993, G.S.R. 176(E) dated the 3rd April,
1996, G.S.R. 631 (E) dated the 31" October, 1997, G.S.R. 504 (E) dated the 20th August,
1998, G.S.R. 7(E) dated the 2nd January, 1999, G.S.R. 682 (E) dated the 5th October, 1999,
G.S.R. 742 (E) dated the 25th September, 2000, G.S.R. 72(E) dated 6th February, 2001 and
G.S.R.54(E) dated 22.1.2002.
Printed by the Manager, Oovt. of tndin Press. Ring Rond. Mnynpuri, New D«lhi-110064
mid Published by the Controller of Publlculioiiv. Diilhi-l 10054.