Fat Spread Grading and Marking Rules, 1994
Rules made under The Agricultural Produce (Grading and Marking) Act, 1937
This text is shown as one document.
Full text
FAT SPREAD GRADING AND MARKING RULES
1. (1) Short title and application – These rules may be 6. Method of Packing- (1) Fat Spread shall be packed only
in sealed packages each weighing 25 gms., 50 gms., 100
gms., 200 gms.,400 gms or 500 gms., net weight.
called the Fat Spread Grading and Marking Rules, 1994.
(2) They shall apply to the Fat spread produced in India.
(3) They shall come into force on the date of their
publication in the official Gazette. (2) Fat Spread shall be packed in packaging material
conforming to Prevention of Food Adulteration Rules, 1955 or
shall be packed in cartons, packets, tins or any other
packaging material duly certified as suitable for packaging by
the Indian Institute of Packaging, Bombay or Central Food
Technological Research Institute, Mysore or Central Institute
of Plastic Engineering Technology, Madras and approved by
Agricultural Marketing Adviser or any other officer
authorised by him in this behalf as per rule 11 of the General
Grading and Marking Rules, 1988.
2. Definitions – In these rules unless the context otherwise
requires:
(a)“Agricultural Marketing Adviser” means the
Agricultural Marketing Adviser to the Government of
India;
(b)“Authorised Packer” means a person or a body of
person, who has been granted certificate of authorisation
to grade and marks Fat Spread in accordance with the
grade standards and procedures prescribed under these
rules;
(3)In the case of tin container only cases, sound and new tins
properly lacquered on the inside with the ‘food grade’ agents
conforming to IS: 5818-1988 shall be used and the containers
shall be closed either by soldering or seaming or both. The
top and bottom of each tin shall be lined with clean hard
neutral vegetable parchment paper.
( c)“Certificate of Authorisation” means a certificate
issued under rule 3 of the General Grading and Marking
Rules,1988;
(d)“Fat Spread” means a product in the form of water in
oil emulsion of an aqueous phase and a fat phase of edible
oils and fats excluding animal body fats;
(e )“Foreign Substance” means any substance other than
the additives and ingredients permissible under these rules
and,
(4) Small packs of 25 gms. Containing fat Spread of same lot
and bearing AGMARK replica shall be packed in a master
container not exceeding 500 gms. In net weight provided that
such master container is packed, sealed and marked in the
manner specified under rule 11 of the General Grading and
Marking Rules 1988.
(f)“Schedule” means Schedules annexed to these rules.
3.Grade designations- For the purpose of these rules the
grade designations shall be the names of the grades which
indicate the quality of fat spreads as given under column I
of the Schedules I, II and III.
(5 )The container shall be free from insect infestation fungus
contamination of any obnoxious and undesirable smell,
4.Definition of quality- For the purpose of these rules the
definition of the quality shall be such as given against
each grade designation in columns 2 to 7 of the Schedules
I, II and III.
(6) Each package shall contain fat spread of one grade
designation only.
7.Method of Marking – (1) A grade designation shall be
securely affixed to or printed on each container of Fat spread
in manner approved by the Agricultural Marketing Adviser or
an officer authorised by him in this behalf in accordance with
rule 11 or the general Grading and Marking Rules, 1988.
5.Grade designation mark – The grade designation mark
shall consist of-
(a) A label specifying name of the commodity, grade
designation and bearing a design consisting of an
outline map of India with the word “AGMARK” and
the figure of rising sun with the words “Produce of
India” and “Hkkjrh; mRikn” resembling the one as
set out in Schedule IV, or
(1) Following particulars shall be clearly and indelibly
marked on each container –
(a) Name and address of the packer;
(b) Place of packing;
(c) Lot /batch no. (b) “AGMARK” replica consisting of design
incorporating the number of certificate of
authorisation. The word “ AGMARK” the name of
the commodity , the grade designation and
resembling the one as specified in Schedule V;
(d) Grade;
(e) Net weight ; and
(f) Maximum retail price inclusive of all taxes.
(3) Every package containing fat spread shall, as the case
may be carry and one of the following labels namely :-
Provided that the use of “AGMARK” replica in lieu of
“AGMARK” label shall be allowed only to such
authorised packers who have been granted necessary.
permission on application, in writing, by the Agricultural
Marketing Adviser or an officer duly authorised in this
regard as per rule 10 of the General Grading and Marking
Rules, 1988.
Milk Fat Spread
Total milk Fat content _______________________per cent
by weight
Date of Packing _________________________________
Use before
1
Mixed Fat Spread
Total Fat content _____________________________ per cent
by weight
Milk Fat content per cent
by weight
*Date of Packing----------------------
Use before -----------------------------
(4). Where and extraneous coloring i.e., annatto or carotone
and extraneous flavoring agent, i.e., diacetyl is added for Fat
Spread, it shall be indicated in bold letter on the container in
the following manner :
Vegetable Fat Spread
Total Fat content _____________________________per cent
by weight
*Date of Packing-------------------------
Use before--------------------------------
Note : The date of packing shall be the date of completion of
analysis of sample and is indicated by month and year on all
packages containing more that 20 gms. net weight of Fat
Spread.
CONTAINS PERMITTED COLOUR AND FLAVOUR
(5). The word “Butter” shall not be associated or used while labeling
the product so as to mislead the customers.
(6). An authorised packer may, after obtaining prior approval of the Agricultural Marketing adviser of any officer authorised by him
in this behalf, in accordance with rule 11 of General Grading and marking Rules, 1988, mark his private trade mark on the
container provided that the private trade marks does not represent quality or grade, different from that indicated by the grade
designation mark, affixed to the container.
8. Special conditions of grant of Certificate of Authorisation - Notwithstanding anything contained in sub-rule (8) of rule 3 of the
General Grading and Marking Rule, 1988 the certificate of authorisation for grading and marking of Fat spread shall not be
granted if-
(a) the authorised packer does not own a unit consisting of equipment and machinery of manufacturing Fat Spread;
(b) the authorised packer does not set up in the authorised premises a fully equipped laboratory with all necessary chemicals and
apparatus for testing the quality of vegetable oils and butter/ghee used in the manufacture of Fat Spread and grading the end
product;
(c) the grading laboratory is not manned by qualified chemist approved by the Agricultural Marketing Adviser or an officer
authorised by him in this behalf in accordance with rule 9 of the General Grading and Marking Rules,1988:
Provided that the Agricultural Marketing Adviser may, if he considers necessary, provide the services of a Government chemist
for which the authorised packer shall have to pay such charges as may be prescribed, from time to time, by the Central
Government.
(d) the premises for processing and packing of Fat Spread are not clean adequately lighted, ventilated. Properly white washed or
painted, free from air and dust pollution and the surroundings are exposed to any of offensive, noxious or foul smell or any
emanation leading to the product contamination;
(e) the unit is not set up in a permanent structure with well cemented walls and floors having doors and windows fitted with fly
and insect proof wire-mesh;
(f) the machinery and utensils are not clean and hygienic and the utensils are not of stainless steel or of food grade resin-
containing or impregnated with fibre glass;
(g) the water proposed to be used is not pure, of potable quality and free from pathological micro-organisms;
(h) the drainage system for flow of the refuse water is not properly maintained :
(i) a certificate has not been procured from the authorised Medical Officer that the personnel engaged in processing and packing
of Fat Spread are of sound health and free from any infections, contagious and other diseases.
9. Other conditions for suspension or cancellation of Certificate of Authorisation- Notwithstanding anything contained in rule 7
of the General Grading and Marking Rules, 1988, the certificate of authorisation shall be suspended or cancelled if a holder of the
same fails to comply with the following additional conditions :-
(i) in the case of resin-coated utensils, recoating have not been done before the expiry of a period of three years after previous
recoating and the packer have not furnished a certificate to that effect ;
(ii) the water used in processing fat spread have not been got examine in every quarter from the public local
2
health authorities for chemical and biological impurities and a certificate have not been obtained to that effect have not
been obtained to the effect that the water is fit for human consumption;
(iii) the personnel engaged in processing and packing of fat spread have not got medically checked up annually from the
authorised Medical officer and a certificate of that effect have not been procured and produced on demand;
(iv) the personnel have not been inculcated against the enteric group of diseases and vaccinated against it once in a year and a
certificate thereof have not been obtained. Person with injury on the body and a bandage or plaster there over is being
permitted to handle the product ;
(v) all necessary facilities and assistance to the approved chemist for carrying out the Grading and Marking of fat spread
under the rules have not been provided by the authorised packer ;
(vi) the proper record of milk fat or vegetable oils used in processing the fat spread and their analysis have not been
maintained and periodical returns to the Directorate of Marketing and Inspection in the proforma prescribed in the
relevant grading and marking instruction issued by the Agricultural Marketing Adviser as per sub-rule (8) of rule 3 of the
General Grading and Marking Rules, 1988 have not been submitted within the prescribed period:
Provided that for suspension or cancellation of a Certificate of Authorisation under this rule, the procedure as laid down
under rule 7 of the General Grading and Marking Rule 1988 shall be complied with.
3
SCHEDULE-1
(See rules 3 and 4)
Grade designations and definition of quality of Milk fat Spread
Special requirements
Grade designation ……………………………………………………………..…………………… Description
Moisture Fat percent Unsaponfiable Acid value
Percent by by matter of extracted
weight weight percent by weight fat
(not more than) ( not more than)
1 2 3 4 5 6
Medium Fat 16.0 to 36.0 60.1 to 80.0 1.0 0.50 It shall be the product in the form
of an emulsion of an aqueous phase
and milk-fat phase produced to the
desired consistency similar to
butter. The milk-fat used in the
preparation shall conform to the
quality requirements stipulated for
‘ghee’ under the Prevention of
Food Adulteration Rules, 1955.
Low Fat 36.1 to 56.0 40.0 to 60.0 1.0 0.50 It shall be the product in the form
of an emulsion of an aqueous phase
and milk-fat phase produced to the
desired consistency similar to
butter. The milk-fat used in the
preparation shall conform to the
quality requirements stipulated for
‘ghee’ under the Prevention of
Food Adulteration Rules 1955.
General Requirements
(7)
1. The product shall be free from animal body fat, mineral oil, vegetable oil and wax.
2. The product shall be free from any foreign substances other than those additives permitted and shall be free from any adulterants
and contaminants.
3. The product shall be free from any objectionable odour, deleterious substances, obnoxious smell and poisonous substances.
4. The product shall have uniform texture and appearance in colour.
5. The product shall contain edible starch not less than 100 parts per million and not more that 150 parts per million by weight.
6. The requirements regarding optional additives to the product shall conform to the following relevant provisions under the
prevention of Food Adulteration Rules, 1955, namely:-
The product may contain:-
(i) edible common salt not exceeding 2 percent by weight in aqueous phase ;
(ii) milk solids-not-fat;
(iii) no flavoring agent except diacetyl whose concentration may not exceed 4.0 parts per million by weight;
(iv) Permitted emulsifiers and stabilizers as per rule 61 of PFA Rule, 1955;
(v) Permitted anti-oxidants, namely, Butylated Hydroxy Anisole (BHA) or Tertiary Butyl Hydro Quinone (TBHQ) not exceeding
in concentration 0.02 percent of the fat content of the Spread;
(vi) permitted class II preservatives namely Sorbic acid including its Sodium, Potassium and Calcium salts (Calculated as Sorbic
acid) or Benzoic acid and its Sodium and Potassium salts (Calculated as Benzoic acid) or both not exceeding in concentration
of 1000 parts per million by weight;
(vii) Permitted sequestering agents as per rule 72 of the PFA Rules, 1955;
(viii) no other colouring agents except Annatto and/or Carotene.
4
SCHEDULE – II
(See rules 3 and 4)
Grade designations and definition of quality of Mixed Fat Spread.
Special requirements
Grade Moisture Fat percent Unsaponifi- Acid value Description
Designation Percent by by weight able matter of extracted
Weight percent by fat
Weight (Not more than)
(More than)
1 2 3 4 5 6
Medium Fat 16.0 to 36.0 60.1 to 80.0 1.0 0.50 It shall be the product in the form of an
emulsion of an aqueous phase and
mixed fat phase consisting of milk fat
with any one or more of hydrogenated,
un hydrogenated refined edible
vegetable oils or interesterified fats used
in the preparation shall conform to the
quality requirements stipulated for
‘ghee’ and vegetable oils respectively
under the Prevention of Food
Adulteration Rules, 1955.
Low Fat 36.1 to 56.0 40.0 to 60.0 1.0 0.50 It shall be the product in the form of an
emulsion of an aqueous phase and
mixed fat phase consisting of milk fat
with any one or more of hydrogenated,
unhydrogenated refined edible
vegetable oils or interest reified fat. The
milk-fat and the vegetable oils fats used
in the preparation shall conform to the
quality requirements stipulated for
‘ghee’ and vegetable oils respectively
under the Prevention of Food
Adulteration Rules, 1955
General Requirements
7
1. The product shall be free from animal body fat, mineral oil and wax.
2. The product shall be free from any foreign substances other than those additives permitted and shall be free from any adulterants
and contaminants.
3. The product shall be free from any objectionable odour, deleterious substances , obnoxious smell and poisonous substances.
4. The product shall have uniform texture and appearance in colour.
5.The product shall contain edible starch not less than 100 parts per million and not more than 150 parts per million by weight.
6.The requirements regarding optional additives to the product shall conform to the following relevant provisions under the
Prevention of Food Adulteration Rules, 1955, namely :-
The product may contain-
(i) edible common salt not exceeding 2 percent by weight in aqueous phase ;
(ii) milk solids-not fat.
(iii) no flavouring agent except diacetyl whose concentration may not exceed 4.0 parts per million by weight ;
(iv) permitted emulsifiers and stabilizers as per rule 61 of PFA Rules, 1955;
(v) permitted anti-oxidants, namely Butyl and Hydroxyl Anisole (BHA) on Teritary Butly Hydro Quinone (TBHQ) not
exceeding in concentration up to 0.02 percent of the fat content of the Spread;
(vi) permitted class II preservatives namely Sorbic acid including its Sodium, Potassium and Calcium salts (Calculated as
Sorbic acid) or Benzoic acid and its Sodium and Potassium salts ( Calculated as Benzoic acid) or both not exceeding in
concentration of 1000 parts per million by weight ;
(vii) permitted sequestering agents as per rule 72 of PFA Rules, 1955;
(viii) No other coloring agents except Annatto and/or Carotene
5
SCHEDULE-III
(See rules 3 and 4)
Grade designations and definitions of quality of Vegetable Fat Spread.
Grade Special requirements Description
designation ----------------------------------------------------------------------
Moisture Fat percent Unsaponifiable Acid value of
percent by weight matter extracted fat
by weight percent by (Not more than)
weight
(Not more than)
1 2 3 4 5 6
Medium fat 16.0 to 36.0 60.1 to 80.0 1.5 0.50 It shall be the product in the form
of an emulsion of an aqueous phase
and vegetable fat phase consisting
of a mixture of any two or more of
hydrogenated refined vegetable oils
or interesterified fat produced to
the desired consistency similar to
butter. The vegetable oils used in
the preparation shall conform to the
quality requirements stipulated
under the Prevention of Food
Adulteration Rules, 1955.
Low Fat 36.1 to 56.0 40.0 to 60.0 1.5 0.50 It shall be the product in the form
of an emulsion of an aqueous phase and
vegetable fat phase consisting of a
mixture of any two one or more of
hydrogenated, unhydrogenated refined
vegetable oils or interesterified fat
produced to the desired consistency
similar to butter. The vegetable oils
used in the preparation shall conform to
the quality requirements stipulated
under the prevention of Food
Adulteration Rules 1955.
General Requirements
7
1. The product shall be free from animal body fat, mineral oil and wax.
2. The product shall be free from any foreign substances other than those additives permitted and shall be free from any adulterants and contaminants.
3. The product shall be free from any objectionable odour, deleterious substances, obnoxious smell and poisonous substances.
4. The product shall have uniform texture and appearance in colour.
5. The product shall contain edible starch not less than 100 parts per million and not more than 150 parts per million by weight.
6. The requirements regarding optional additives to the product shall conform to the following relevant provisions under the Prevention of Food Adulteration
Rules, 1955, namely :-
The product may contain -
(I) edible common salt not exceeding 2 percent by weight in aqueous phase ;
(II) milk solids-not fat.
(III) No flavouring agent except diacetyl whose concentration may not exceed 4.0 parts per million by weight ;
(IV) Permitted emulsifiers and stabilizers as per rule 61 of PFA Rule, 1955;
(V) Permitted anti-oxidants, namely Butylated Hydroxy Anisole (BHA) orTeritary Butyl Hydro Quinone (TBHQ) not exceeding in concentration up to 0.02
percent of the fat content of the Spread;
(VI) Permitted class II preservatives namely Sorbic acid including its Sodium, Potassium and Calcium salts (Calculated) as (Sorbic acid) or Benzoic acid and
its Sodium and Potassium salt( Calculated as Benzoic acid) or both not exceeding in concentration of 1000 parts per million by weight ;
(VII) Permitted sequestering agents as per rule 72 of PFA Rules, 1955;
(VIII) No other coloring agents except Annatto and/or Carotene
7. The product shall contain raw or refined Seasame (TILL) oil in sufficient quantity so that when separated fat is mixed with refined Groundnut oil in the
proportion of 20:80 the red colour produced by Baudouin’s test shall not be lighter than 2.5 red units measured in 1 centimeter cell on Lovibond scale.
8.The product shall contain not less than 25 international units of synthetic vitamin ‘A’ per gram at time of packing and shall show a positive test for Vitamin
‘A’ when tested by Antimony Trichloride (Carrurice) reagent as per method prescribed under IS : 5886-1970
9. The melting point of extracted fat by capillary slip method shall not be more than 370 C.
6
SCHEDULE –IV
(See Rule 5)
Design of the Agmark Label
SCHEDULE -V
(See rule 5)
Design of Agmark Replica
CA No.
Name of Commodity : Fat Spread
Grade :
NOTE : Principal rules were published in the Gazette of India, Part II Section3,sub-section (I) dated 15-4-1995 vide G.S.R 186,
Dated. 20-3-1995
7